Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
However, a closer look at the flaws noted in the iBaby’s negative reviews—currently, one-star reviews make up roughly 25 percent of the total—pushed us even further toward the Infant Optics as the one we’d choose for a similar price. The app is pretty poorly done. You may lose a connection even with a perfect Wi-Fi signal. Some people report never being able to connect to it at all. The plug on this unit is an odd 2-piece design that is unnecessarily complicated (but it can be fairly easily replaced with another basic 5V charger if you want). All told, the M6S comes close to the functionality of the Infant Optics pick in some ways, and the ability to access the camera remotely is a huge plus, but all the other drawbacks are too much to overlook.
It uses 2.4GHz FHSS technology that offers a private connection between the monitor in your baby's room and the dedicated viewer in your hand. The FHSS connection should minimize interference, and most reviewers say the audio is clear. In BabyGearLab's testing, the reviewer found that the Phillips AVENT had the best audio signal of any of the monitors it tested.

iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
The iBaby shares several advantages over RF monitors that are common to Wi-Fi models as a category. It can be accessed from your phone anywhere. Multiple phones can connect to it. You access it via an app and don’t need to worry about finding, charging, and keeping track of a separate dedicated monitor. Some other “advantages” are add-ons we don’t consider necessary. You can record the camera’s footage, for example, or read parenting tips within the apps, or receive notifications or alerts when the monitor detects motion or sound. You can get air-quality alerts (we did not test them for accuracy). In other ways—pan/tilt, night vision, image quality—the iBaby is similar to RF video monitors like our pick.
Before buying or registering for a baby monitor (or any wireless product), be sure you can return or exchange it in case you can't get rid of interference or other problems. If you receive a monitor as a baby-shower gift and know where it was purchased, try it before the retailer's return period ends. Return policies are often explained on store receipts, on signs near registers, or on the merchant's website. But if the return clock has run out, don't feel defeated. Persistence and politeness will often get you an exception to the policy. Keep the receipt and the original packaging.
To test each camera’s night vision, we used them in darkened bedrooms with blackout curtains, with and without nightlights. For a more extreme test, we set the cameras up in a windowless room in a basement with a towel blocking light from the door. We aimed all the cameras at a doll’s face approximately 6 feet across the room, looked at the monitors, and tried not to creep ourselves out.
Start by deciding whether you want an audio-only monitor or one that lets you see as well as hear your baby. Some parents are reassured by hearing and seeing every whimper and movement. Others find such close surveillance to be nerve-racking. Having a monitor should make life easier, not create a constant source of worry. You might find that you don't really need a monitor at all, especially if your home is small.
This monitor is known for its zoom lens, included in the box, that lets you see your baby up close even if you have to position it farther away from the crib. You can use the monitor to remotely adjust the camera, and you don’t have to worry about plugging the monitor in overnight—it can sit on your nightstand for up to 10 hours in the power-saving mode (similar to sleep mode on your computer, but it still provides sound monitoring while the display is off) and up to six hours with the display screen constantly on.