Testing battery life for all the monitors was for the parent device only. While some of the dedicated options have a battery in the camera in the event of a power outage, most do not, and they are not intended for use as an all-night option. So while we would support a cordless camera for monitoring baby, due to safety concerns with babies and strangulation hazards, none of the products in our review offer this.
If you want to know everything about your baby, down to the heartbeat — the Angelcare AC315 is our top motion-sensor monitor. The sensor mat slips under the mattress in your baby’s crib, and if it detects no movement after 20 seconds, it sends a loud alarm to the baby and parent units. Its touchscreen can be a little finicky. The Baby Delight is less prone to false alarms; however, our parent testers were concerned that the small clip-on sensor might be a choking hazard.
Video baby monitors are simple, inexpensive tools for watching your child, and HD video is not a necessity for this task. While some baby monitors have excellent video, even those with lower quality video are suitable for watching your infant. Screen resolution does not necessarily mean good image quality, so we didn't use it as a point of comparison, relying only on video performance as observed in our tests.
Sound devices relay what is happening in baby's room via sound only. A great sound option is quiet unless the baby is making noise so that you won't be disturbed by white noise or constant static. This basic monitoring type can be all you need if your goal is being alerted when your baby is crying and needs your assistance. This style can be elementary with sound only like the V-Tech DM111 or it can have bells and whistles like a nightlight, 2-way talk, lullabies, and mic sensitivity adjustment features like the Philips Avent DECT SCD570/10. Most parents can get by with a sound only device as it provides the information you need to determine if your baby needs you or not.
In early 2011, two infant strangulation deaths prompted a recall of nearly two million Summer Infant video monitors. The CPSC also reported that a 20-month-old boy was found in his crib with the camera cord wrapped around his neck. In that case, the Summer Infant monitor camera was mounted on a wall, but the child was still able to reach the cord. He was freed without serious injury.
When it comes to video monitors, you'll want to make sure that the one you're buying offers night vision and a decent resolution. Most baby monitors with a dedicated viewer sadly have low VGA resolutions, which are much worse than the majority of smartphones you can buy these days. A few have a 720p HD resolution, which is decent. We hope more baby monitors go that route in the future.
Child Safety: We care a lot about the safety and well-being of your babies, and our baby monitor reviews are no exception to that rule. Most of the safety issues with baby monitor systems revolve around the parent's due diligence: secure the wires out of reach and out of sight from your baby, make sure you put the camera out of reach (especially when you're mounting to the rail of a crib), and always keep them away from water and a running humidifier. In addition to these basic safety tips, the newer heart rate monitoring, breathing monitoring, and movement monitoring systems can add confidence to parents worried about their baby sleeping in a different room. A good example of a baby monitor with heart rate monitoring is the Owlet Smart Sock that can track heart rate and blood oxygenation levels, and stream that information to an app on your smart phone. Of course, don't be too confident because these devices are not hospital- or laboratory-grade monitoring systems, so keep that in mind.
Among the negative reviews, the most consistent complaint has to do with connectivity issues—either difficulty linking up initially or randomly dropping the connection while in use. These represent a slim minority among mostly positive reviews, and we did not have similar issues during our test. One consequence of losing the connection (whether it’s by a dropped link or via manually unplugging the camera) is that disconnecting causes the parent unit to emit a sharp, loud, repetitive beep. It is annoying—especially so if it happens in the middle of the night—but you should rarely hear it under normal circumstances.
Baby monitors may have a visible signal as well as repeating the sound. This is often in the form of a set of lights to indicate the noise level, allowing the device to be used when it is inappropriate or impractical for the receiver to play the sound. Other monitors have a vibrating alert on the receiver making it particularly useful for people with hearing difficulties.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
The Levana Lila is the second highest ranking dedicated monitor in the review, and 5th overall. This budget-friendly option has the longest battery life of any dedicated monitor we tested and scored well enough for ease of use and sound clarity that you won't be frustrated. Unfortunately, this monitor has a shorter range than the Philips Avent SCD630 and the fewest features in the group (which makes it easier to use). So it may not be a good choice for parents that want all the bells and whistles. This monitor does sport 2-way talk to baby, sound activation, and automatic screen wake/sleep, which are some of the most important features in our mind. The Lila has no zoom, and the field of view is rather small for a camera that is not remotely operated (no pan or tilt). However, if you want a dedicated monitor for the simplicity and peace of mind with less chance of a dropped signal, and budget is a factor, then the Lila can't be beaten.
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here.
While ranking among Amazon’s top-selling baby monitors, the Motorola MBP36S and MBP33S, which are listed on the same page, have more negative reviews than positive ones. Many reviewers complain about poor battery life and deficient quality and durability. BabyGearLab also gave these monitors a low rating, citing the “disappointing images and sound on a hard to use parental unit.”
Unfortunately, The DECT SCD570/10 is one of the most expensive sound devices we tested with a price that rivals some of the video options. This higher price means that parents looking in this price range may want to consider a video product instead to get more bang for their buck. Alternatively, if you want a sound option with full-bodied sound and fancy features for baby, and you aren't interested in watching your little one, then the SCD570 could be the one for you.
Baby monitors, despite the name, are meant more for the caregiver than they are for the baby. We asked parents about which features they felt were helpful, like a long range so they could wander carefree all over the house, and reliability so they weren’t struggling to maintain a signal. Other features like being able to play lullabies, or receive temperature alerts are only as useful as you make them. And a few features, like motion monitors, can be exceptionally comforting for some, and distressing for others.
Range of signal: Some baby monitors have better range than others. If you live in a big house with multiple rooms, range will be a key consideration for you. Anyone who lives in a single-story house or a smaller apartment may not need as much range. Many baby monitors have an alert when you get out of range, and the packaging typically gives you an estimate of the range. Bear in mind that range varies widely from home to home. The construction of the walls between you and the baby monitor may even limit the range.
The dedicated monitors did not score as well as the Wi-Fi products for features. It isn't that they don't have features, it's just that they don't offer as many, don't have features that make the camera easier to use or the features they have don't work that well. All of the dedicated monitors have 2-way communication, but they all also can only be viewed on the parent device that comes with the monitor. Some offer temperature sensors and lullabies, but most of them don't provide motion detection or great zoom. The highest score for features for the traditional video products was 5 of 10. Two monitors managed to earn the 5 rating, with the Infant Optics DXR-8 being the highest ranked overall with a feature score of 5. However, this monitor did not score well overall, or in key metrics, we think are essential for a good video monitor. So despite having a high score for features, we still would not recommend this monitor to a friend.
A word of caution about extremely cheap baby video monitors (we're talking devices that cost less than $50): they're not known for their security and can be hacked. Be sure to always change the default password of any connected device you purchase. You can also protect yourself by sticking to known vendors who post frequent firmware updates and have easy-to-reach customer support.
At the end of the day, if all you want is a no muss no fuss monitor that most parents will be able to set up and use quickly, then either Wi-Fi option will work. However, if you just want to plug it in and have it work without the need to learn something new, then the award-winning Philips Avent SCD630 or the Best Value, Levana Lila, will get the job done simply and fast. The cheaper price tag and simplicity of fewer buttons (easier to use) on the Levana Lila make it a great option as a secondary monitor for Grandma or travel.
This monitor is known for its zoom lens, included in the box, that lets you see your baby up close even if you have to position it farther away from the crib. You can use the monitor to remotely adjust the camera, and you don’t have to worry about plugging the monitor in overnight—it can sit on your nightstand for up to 10 hours in the power-saving mode (similar to sleep mode on your computer, but it still provides sound monitoring while the display is off) and up to six hours with the display screen constantly on.