Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
A baby monitor, also known as a baby alarm, is a radio system used to remotely listen to sounds made by an infant. An audio monitor consists of a transmitter unit, equipped with a microphone, placed near to the child. It transmits the sounds by radio waves to a receiver unit with a speaker carried by, or near to, the person caring for the infant. Some baby monitors provide two-way communication which allows the parent to speak back to the baby (parent talk-back). Some allow music to be played to the child. A monitor with a video camera and receiver is often called a baby cam.
Range: Range is the main drawback of an RF model, as audio monitors can roam farther out, and a Wi-Fi connection can theoretically be checked anywhere. We wanted an adequate range in a typical home—to be able to maintain a signal up or down a flight of stairs, across the house, and out on a patio or driveway, but we didn’t expect much beyond that. We zeroed in on monitors rated to about 700 feet of range1 or greater.
Being a new parent is an exciting and occasionally stressful journey into uncharted territory. There are so many things to learn about your baby and all the different products you need to keep your little one happy and healthy. One of the most important and expensive purchases you'll make when you're outfitting your nursery is buying a baby monitor.
The Infant Optics DXR-8’s interchangeable optical lens, which allows for customized viewing angles, truly sets this monitor apart. It gives the option of focusing in on a localized area or taking in the whole room. Couple that with the remote pan/tilt control and night vision and you’ve got a monitoring system that not only grows along with your baby, but one that can be adjusted to follow her around the room as she plays. Parents can calm their baby with the two-way talk feature and monitor the temperature to make sure the baby is safe and secure.
After testing more than half-a-dozen mounted cameras that beam live video from a nursery, the best baby monitor we've tested is Netgear's Arlo Baby. Netgear's baby monitor packs in a number of must-have features such as clear 1080p video, two-way audio and a host of sensors. Everything's easily accessible from a well-organized mobile app that puts the Arlo Baby's controls at your fingertips.
Many of the baby monitors we've tested are internet-connected, letting you watch infant with your phone or tablet through an app just as if you were checking a home security camera. Because of this, you might not actually get a standalone display to go along with the camera. They aren't out of the question, however; some camera-only baby monitors offer viewers as an add-on or in a bundle. And if there aren't any available, you can simply get an inexpensive tablet like the Amazon Fire to use as a dedicated viewer.
When you're child is still an infant, your family's UrbanHello REMI will serve as an audio baby monitor that helps you keep tabs on the little one. Its softly glowing face also serves as a clock parents and other caregivers can check when in the nursery. When paired with its app, REMI's sleep tracking function will help you establish your child's sleep patterns, noting evident wakeups and periods of steady rest based on the sounds it detects in the room.
Most monitor systems have an electrical cord or nonrechargeable battery option for the unit in the baby's room. And receivers typically have an electrical cord or rechargeable batteries. Some models are notorious for burning through batteries at an alarming rate. Parents have complained that even monitors sold with rechargeable batteries built in can drain quickly. Our Baby Monitor Ratings , available to subscribers, include an evaluation of battery life. Subscribers can also check out our battery report and Ratings (for subscribers).
For parents who want to monitor their baby’s cries from the office, or the gym, or Tahiti, the BB-8-looking iBaby M6S syncs right up to your house Wi-Fi connection ⏤ so instead of using a dedicated handheld receiver, you watch all the action on a smartphone app. It offers impressive 1080p HD video (with record function), a 360-degree view with 110-degree tilt, and an array of high-tech sensors including motion, sound, in-room temperature, air quality, and humidity. The only thing it seemingly won’t do is fix your X-Wing fighter. Although it makes up for it with night vision, two-way talk, and 10 programmed lullabies and bedtime stories, to which you can even add your own voice.
Both Baldwin and Kay recommend iBaby’s M6S Wi-Fi video monitor for its design and ease of use. Resembling a little robot, the iBaby offers 360-degree views and 110-degree tilt, 1080p video with night vision, and even comes equipped with lullabies. Other features include temperature, humidity, and air-quality sensors, which Baldwin admits are bells and whistles, but could be useful depending on what kind of parent you are. And, of course, everything comes straight through to your smartphone or tablet, which can also remotely control settings. And while some parents may be concerned about potential hacking of Wi-Fi monitors, Baldwin found that the risk is fairly low and usually occurred in cheap, off-brand models.
For these reasons, the Evoz Vision tops our list as best travel baby monitor. The Wi-fi enabled monitor allows more than one person to check in on baby—a nice feature when you're traveling to visit family and friends. Just grant grandparents or sitters access to the app. Another great travel feature: It has an unlimited range. Plus, it uses cry detection algorithms to distinguish baby cries from other noises and will alert you via text or email when baby cries, based on your preference settings. Just make sure you'll have Wi-fi at your destination.
Unfortunately, The DECT SCD570/10 is one of the most expensive sound devices we tested with a price that rivals some of the video options. This higher price means that parents looking in this price range may want to consider a video product instead to get more bang for their buck. Alternatively, if you want a sound option with full-bodied sound and fancy features for baby, and you aren't interested in watching your little one, then the SCD570 could be the one for you.
Last, a few features are simply not that useful, but they’re more like unnecessary clutter than legitimate flaws. The talk back feature can be difficult to understand on the baby end of the line (we found it works best—that is, intelligibly—if you speak about a foot away from the microphone, and avoid shouting). A “shortcut” button to control the monitor’s volume and brightness doesn’t really save you much time. There are other features on the menu—counting the little songs, a timer, and a zoom, you have a total of about seven. But honestly, after testing this monitor for some time and others for years longer, the only thing you really need to be able to do regularly is adjust the volume.
You can expect to pay between $30 and $200 for a dedicated video baby monitor, with most branded units costing around $100 on average. Units that allow you to remotely reposition the camera with pan-tilt-zoom functionality are more expensive than those with a fixed view. Wi-Fi video baby monitors don't generally cost extra, because the lack of a specific parent unit balances out the costs of adding Wi-Fi functionality.
If you want to be as streamlined as possible and happen to have extra Apple devices hanging around, the Bump recommends the Cloud Baby Monitor app, which turns your iPhone, iPad, Apple TV, Apple Watch, and even your laptop into a secure Wi-Fi baby monitor. Use one device in the nursery as a camera, then have high-quality live video and audio transmitted to a secondary device, or even a third or fourth. Using the “parent unit,” you can talk to your child through two-way video and audio, turn on lullabies or white noise, and adjust the night-light on the other side. The app will also alert you to any noise and motion occurring in the other room.
Many parents find that a basic sound product more than meets their needs. They plan to run to baby's aid each time they hear them cry, and they don't need to spy on their baby with video. Using a sound option is the cheapest way to go to get a quality product that works well. However, if you need or want to see your baby, then a video option is the only way to meet this need. Choosing a Wi-Fi option means no concerns about range, the ability to see your baby when you are away from home, and usually better image quality. Wi-Fi also means you'll be able to use it for longer as potential security or nanny cam; this adds value you may not be considering right now (but should). Movement monitoring options are a luxury that most parents can do without. If you're worried about your little one and SIDs, studies show that having a baby sleep in their own bed in your room (along with standard safe sleep practices) goes a long way in helping to prevent SIDs and could potentially be more effective than movement monitoring. Choosing a great beside bassinet may be a better solution than a movement product. However, if your heart wants a movement product, then be sure to consider a sound or video option to pair with it so you can be sure to hear the alarm from another room.
The new voluntary ASTM International F2951 standard has been developed to address incidents associated with strangulations that can result from infant entanglement in the cords of baby monitors. This standard for baby monitors includes requirements for audio, video, and motion sensor monitors. It provides requirements for labeling, instructional material and packaging and is intended to minimize injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of baby monitors.
In early 2011, two infant strangulation deaths prompted a recall of nearly two million Summer Infant video monitors. The CPSC also reported that a 20-month-old boy was found in his crib with the camera cord wrapped around his neck. In that case, the Summer Infant monitor camera was mounted on a wall, but the child was still able to reach the cord. He was freed without serious injury.
The handheld unit's 5-inch screen is the largest in our review, complementing the camera's wide-angle lens. However, its resolution is the same as smaller units, so the video quality, while acceptable, is poorer. Also, you can't move the camera remotely, a feature you may not use if you only watch your baby as they sleep. The Wide View 2.0 makes up for its video quality with a user-friendly design. It only takes a few minutes to set up and a couple hours to charge the handheld unit. The handheld unit lets you adjust the volume and has an uncomplicated menu. This simplicity comes at the cost of common features – the Wide View 2.0 doesn't track room temperature, and it can't play lullabies through the camera unit. Because this is a simple video monitor, the battery lasted nine hours before it needed to recharge during our tests. The overall best baby monitor, the Infant Optics DXR-8, went 10 hours before shutting off, so this is a very good result. The Summer Infant Wide View 2.0's handheld unit has a limited indoor range compared to most other baby cameras – it’s good enough for most homes but insufficient in particularly large ones. Summer Infant offers a one-year warranty, which is average for video baby monitors.
The baby monitor market is really exploding with new high-quality options that use a wifi camera connected to an app on your smart phone. The Nanit smart baby monitor is a new addition to this market, and we're really excited about it! We got our hands on this baby monitor for testing in mid-2018. Out of the box, the system is really well designed and made with high-quality components. The camera itself looks sleek and modern, similar to the Lollipop baby monitor. Like the other wifi baby monitors on this list, the Nanit streams high definition (HD) digital video and digital audio right to an app on your phone, and the app is available for Android and Apple devices, including phones and tablets. It does this by connecting to your home's wifi and streaming video right through your existing router. In our testing, we found that if you're at home the video streaming is very fast (low latency) and high clarity. And if your internet goes down, it will still work as long as you're still connected to your home wifi. On a 4G LTE connection, the video is a bit choppy from time to time but we found that a common theme with any wifi-based camera system. Let's first talk about some of the features. First, there is an awesome digital zoom feature right from your app - you pinch the screen just like with anything else and get a clearer view of your baby. Second, it has temperature and humidity sensors so you can keep track of nursery conditions. We compared the temperature and humidity readings to our hygrometer and it was very accurate. Third, we loved the wall-mount because it gives you a really nice overhead vantage point on your baby, unlike some of the standing cameras that sit on a nearby surface - this has a much better view. Note that if you want to mount it on a nearby surface like a dresser or changing table, you can buy a separate Nanit table mount. Fourth, it includes the wall mounting hardware and the cord hiding strips to keep the wires out of baby's view and reach. Fifth, the camera quality was excellent in both day and night vision conditions. Finally, there are some other nifty features, like the ability to receive alerts for sound or motion, to have audio running in the background of your phone (which is great for nighttime), a nightlight that you can control right from the app, and encrypted communication. So that's all excellent, and when you combine it with the monthly subscription ($10/month) for Nanit Insights, it's a great package that not only monitors but also can track your baby's sleep habits (including videos). A 1-month trial is included for this service so you can check it out and see if you want to consider - we suspect that most parents will be content with just the real-time monitoring without any habit tracking. In our testing, everything worked really well, and we were consistently impressed by the streaming video and sensors. The biggest drawback for this monitor is the price - it's about $250, which is up at the top of the price range for this entire list. We'll let you figure out whether it's worth the cost for your specific needs. Update: we have now been using this Nanit baby monitor for just over 3 months, and we continue to be very happy with it, it seems to be not only high quality but also reliable (so far!). Interested? you can check out the Nanit Baby Monitor here!
Check the return policy: Every family is different, so it can be hard to choose the perfect baby monitor for your needs. For that reason, we recommend you look into each product's return policy. Some companies are very good about letting you return baby monitors, but others are not. You may need to try a few different ones out before you find the winner. Obviously, we hope this guide assists you in making the right choice, but it's always good to have a backup plan. We've noted the return policy for each baby monitor we recommend in this guide.
You might see monitors on the market with claims that they can track a baby's breathing or movements, but unless the unit is registered with the FDA, it's not a medical device. Consumer Reports hasn't tested this type of monitor. Talk with your pediatrician if you think your child has a condition that warrants medical monitoring. He or she can give you advice on the best devices.
With a 1,000-foot range and DECT technology, the VTech Safe & Sound Digital Audio relays sound with excellent clarity. Two-way communication offers a way to calm a baby when he or she is waking up or trying to fall asleep. It also includes a night light for late-night feedings. The digital display indicates signal strength and power/battery life. This monitor offers a full range of alarms when your baby wakes — audio, indicator lights, and vibration.
The DXR-8 uses a secure 2.4 GHz FHSS wireless transmission to ensure privacy, gets up to 10 hours of battery life on a single charge, and can switch to audio-only mode with the camera off to save juice. That said, it has gotten panned for a quickly declining battery life (as well as poor range). Still, that hasn’t stopped 24,000 reviewers from giving it an overall 5-star rating on Amazon. In terms of bells and whistles, it features everything parents have come to expect in a monitor: invisible infrared night vision, (no annoying blue light to wake the baby) two-way intercom, room-temperature sensor, and the ability to work with up to four other cameras.
Our testers preferred the Baby Delight’s parent unit — its buttons were more responsive than Angelcare and it was easier to set up. This movement monitor uses a cordless magnetic sensor instead of a pad. Because the sensor is clipped onto your baby’s onesie, right next to their chest, the alarm won’t go off if you forget to disarm it before a middle-of-the-night feeding.
If you opt for a Wi-Fi video baby monitor, you'll need a strong internet connection, because if your internet fails, so does your baby monitor. These baby monitors operate like your average smart home security camera from Nest, Canary, or others. You connect the camera to your Wi-Fi network, and then you can access live video anywhere on your computer, smartphone, or tablet. Many of these types of cameras offer encryption and other high-tech security features.
Child Safety: We care a lot about the safety and well-being of your babies, and our baby monitor reviews are no exception to that rule. Most of the safety issues with baby monitor systems revolve around the parent's due diligence: secure the wires out of reach and out of sight from your baby, make sure you put the camera out of reach (especially when you're mounting to the rail of a crib), and always keep them away from water and a running humidifier. In addition to these basic safety tips, the newer heart rate monitoring, breathing monitoring, and movement monitoring systems can add confidence to parents worried about their baby sleeping in a different room. A good example of a baby monitor with heart rate monitoring is the Owlet Smart Sock that can track heart rate and blood oxygenation levels, and stream that information to an app on your smart phone. Of course, don't be too confident because these devices are not hospital- or laboratory-grade monitoring systems, so keep that in mind.
It uses 2.4GHz FHSS technology that offers a private connection between the monitor in your baby's room and the dedicated viewer in your hand. The FHSS connection should minimize interference, and most reviewers say the audio is clear. In BabyGearLab's testing, the reviewer found that the Phillips AVENT had the best audio signal of any of the monitors it tested.
Winner of this year’s JPMA innovation award for safety, the Nanit Smart Baby Monitor is an over-the-crib Wi-Fi video monitor that uses computer vision technology to track a baby’s sleep habits/patterns and provide data-crazed parents with stats and customized sleep tips in the morning, most of which are written by medical professionals. The only catch is that to receive these reports and tips, you need to pay $100 a year for Nanit Insights, the company’s subscription-based service. For parents who’d rather not pay the monthly fee, Nanit is still a sleek HD video monitor with night vision, one-way audio, and a soft glow LED nightlight.