Technology has changed the way parents monitor their babies. With today’s audio and video, parents can keep an ear peeled and an eye out for the most subtle changes in their little ones. Whether you want to simply hear your baby’s first cry or you’re looking for a high-tech video monitor with a sleep sensor, there’s a baby monitor out there for you.


For these reasons, the Evoz Vision tops our list as best travel baby monitor. The Wi-fi enabled monitor allows more than one person to check in on baby—a nice feature when you're traveling to visit family and friends. Just grant grandparents or sitters access to the app. Another great travel feature: It has an unlimited range. Plus, it uses cry detection algorithms to distinguish baby cries from other noises and will alert you via text or email when baby cries, based on your preference settings. Just make sure you'll have Wi-fi at your destination.


In our tests, Levana Ayden did well in the categories where Levana Keera underperformed, particularly with regards to user-friendliness. This was most noticeable in the simple controls, which are easy to learn. Levana Ayden also has a few useful extras such as a built-in nightlight and three lullabies to help sooth your baby as they sleep. This unit costs around $90, which is quite competitive with other video baby monitors. Unfortunately, the unit lacks the ability to remotely reposition the camera and has lower than average video quality, which can make details hard to see. The audio had mild interference, but this didn't affect the overall quality much. The one-year warranty is typical of video baby monitors.
During our tests, we found ourselves among the fraction of buyers having problems with the display on the DXR-8. Our first test unit worked fine out of the box, but after a couple of hours running on battery, the display became distorted and nothing would fix it. Likewise, you’ll find a few complaints on Amazon of users experiencing dead pixels after about a year of use (here’s one and here’s another). The good news: Those folks reported that Infant Optics replaced their monitors even though some were out of warranty. In fact, the company consistently receives decent feedback on customer service. Infant Optics quickly replaced our faulty unit (but as a media inquiry, that’s not comparable to typical customer service), and the new unit has performed fine.
The iBaby doesn't have the best sound which is somewhat disappointing considering the great video quality. It is also going to look out of place should you try to use it for any other purpose outside baby monitoring. This limited use means it doesn't retain value the way the Nest Cam will. However, if you want a baby-centric video option that has lots of fun bells and whistles, then the iBaby is the one for you.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
The Nest Cam isn’t a dedicated baby monitor, but an all-around home protection device. Besides aiming the camera at the crib, you can also use it to keep an eye on the nanny, the dog or your empty home while you’re away. The video camera can be set up anywhere, and you can watch the live streaming from your smartphone. It also has two-way communication so you can soothe your little one to sleep, even if you’re offsite. If the device senses motion or sound, it’ll send a phone alert or an email to you. Missed what happened? From the app, you can view photos of any activity that took place over the last three hours. (There are Nest Aware subscriptions available that provide access to 5, 10 or 30 days of recordings, for $5, $10 or $30 a month, respectively). The picture quality is super sharp, too.
×