Why spend money on a baby monitor, which serves a single specific purpose, when you could use an indoor home-security camera that you can repurpose once your kid leaves the nursery? We wondered the same thing, so along with with dedicated video baby monitors, we tested a Nest Indoor Cam, currently among our top-rated wireless home security cameras.
This monitor is known for its zoom lens, included in the box, that lets you see your baby up close even if you have to position it farther away from the crib. You can use the monitor to remotely adjust the camera, and you don’t have to worry about plugging the monitor in overnight—it can sit on your nightstand for up to 10 hours in the power-saving mode (similar to sleep mode on your computer, but it still provides sound monitoring while the display is off) and up to six hours with the display screen constantly on.

A reliable video baby monitor is a must-have for new parents. These high-tech monitors allow you to keep tabs on your little one from a different room, giving you peace of mind as you go about your day and letting you know the minute your baby needs you. However, there are a lot of video baby monitors available today, and you may not know which one best suits your needs.


Ease of setup and installation factored heavily into our ratings, including whether an account needed to be created and if there were any extra subscription fees necessary. Each unit had cords protruding out of its back, so design wasn't much of a factor in my choice, though parents should take care to keep dangling cords and wires away from their children's reach when setting up a monitor.
There are a few things you can demand from a decent HD video baby monitor, like a crystal clear image and good night vision capabilities. And there are things you can expect of a good Wi-Fi-enabled monitor, like easy remote access from a smart device with real-time streaming audio and video. Then there are things you might hope for from a baby monitor, like two-way talk and solid battery life.
Our hands-on reviews put 32 video baby monitors to the test, examining their features, image clarity (day and night vision), convenience, reliability, safety, the range of reception, and versatility. We came away with over 15 of the top baby monitors of the year, including the top-ranked Infant Optics monitor to the super versatile Project Nursery monitor.

During our tests, we found ourselves among the fraction of buyers having problems with the display on the DXR-8. Our first test unit worked fine out of the box, but after a couple of hours running on battery, the display became distorted and nothing would fix it. Likewise, you’ll find a few complaints on Amazon of users experiencing dead pixels after about a year of use (here’s one and here’s another). The good news: Those folks reported that Infant Optics replaced their monitors even though some were out of warranty. In fact, the company consistently receives decent feedback on customer service. Infant Optics quickly replaced our faulty unit (but as a media inquiry, that’s not comparable to typical customer service), and the new unit has performed fine.
If we picked a winner based on features alone, this would be much higher up on the best baby monitor list! The folks at Project Nursery really pulled out all the stops with this feature-packed video monitor. Here are some of the stand-out features: remote camera pan and tilt, two-way audio intercom, infrared night vision, secure (encrypted 2.4GHz) wireless connection, motion alerts, lullaby music, convenient unintrusive sleep modes, low or high temperature warning, pairing for up to 4 cameras, accurate low battery warning system, and great battery life. But even with all of that, there's something really awesome and unique about this baby monitor: in addition to the nice 4.3" screen (there's also a 5" version for a much higher price), it also comes with a 1.5" mini video monitor that you can take with you! Put it on your waist, on the kitchen counter, on your wrist (using the included strap!), or on a table or desk while you do work. We found this mini video monitor aspect super versatile, with high-quality resolution and color video, and probably worth the added cost. Speaking of cost, having all these awesome features and the nifty extra monitor comes at a pretty reasonable cost (about $120) unless you upgrade to the 5" screen. Is it worth it? Well, in our testing the mini monitor had a battery life of about 7 hours when fully charged, which we were really impressed with. The larger "parent" monitor is usually plugged in (like on a bedside table), but on battery mode we got it to run overnight without charging for about 12 hours. That's great battery life for such a large-screen video baby monitor! So some high-quality lithium-ion batteries went into making these monitors, and it shows. The color screen and audio quality were also very high on both units, and it's awesome to have multiple parent units for different situations. Out of the box, setup was pretty simple, and all parts appear to be high-quality and well made. So with all those positives, why isn't this #1 on our list!? First, it has the remote camera pan/tilt, but we found that when the camera is tilted down too much the infrared night vision feature doesn't work so well (there's a glare/reflection). We needed to re-position it in our nursery so that it wasn't pointing down at such an extreme angle; we suspect this won't be an issue in most cases. Second, we tried to get both the large "parent" monitor to work at the same time as the mini monitor, but couldn't get them to both show video simultaneously. We understand that may not be a common use case, but might be nice for parents to be in different locations with both being able to monitor the baby's activity. Again, not a huge issue. Overall, this is an excellent baby monitor system with only some minor drawbacks. Worth the cost? We'll leave that up to you: if you want these awesome features, it's probably worth every penny! Update: So it's been about 6 months now, and we've noticed two things worth pointing out. One is that the cameras disconnect intermittently and have a real hard time reconnecting; this has happened in the middle of the night a few times, which was concerning. Second is that the battery life has declined quite a bit since when it was new, now only lasting a few hours off the charger.
It should come as no surprise that we selected Nanit as the best baby monitor overall—after all, it was the winner of The Bump Best of Baby Awards this year. Nanit gives you both a clear, unobstructed view of baby thanks to the over-the-crib mount as well as sleep insight reports and nightly sleep scores via an app. You not only see how baby sleeps, but learn how to help baby sleep better.
Your baby needs constant attention, but you can't be in its room every hour of every day. That's what baby monitors are for. What started as audio-only infant care devices to let you listen in on your child from another room, have since added video cameras and connected features to the mix so you can always keep an eye on your little one. There are still some great audio monitors out there—here we're focusing on models that also provide some form of video feed.
Wireless systems use radio frequencies that are designated by governments for unlicensed use. For example, in North America frequencies near 49 MHz, 902 MHz or 2.4 GHz are available. While these frequencies are not assigned to powerful television or radio broadcasting transmitters, interference from other wireless devices such as cordless telephones, wireless toys, computer wireless networks, radar, Smart Power Meters and microwave ovens is possible.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
Both Baldwin and Kay recommend iBaby’s M6S Wi-Fi video monitor for its design and ease of use. Resembling a little robot, the iBaby offers 360-degree views and 110-degree tilt, 1080p video with night vision, and even comes equipped with lullabies. Other features include temperature, humidity, and air-quality sensors, which Baldwin admits are bells and whistles, but could be useful depending on what kind of parent you are. And, of course, everything comes straight through to your smartphone or tablet, which can also remotely control settings. And while some parents may be concerned about potential hacking of Wi-Fi monitors, Baldwin found that the risk is fairly low and usually occurred in cheap, off-brand models.
Dropped connections are another problem. "We tested our Wi-Fi monitors on two separate routers and consistently had problems -- we'd often lose the connection some time in the night and not even realize that the monitor had disconnected until morning," Wirecutter says. "This happened with all three Wi-Fi models we tested. We never really felt confident relying on any of the connected monitors overnight, despite the fact that the modem and router were literally on the other side of a wall from the monitor."
"Quick and easy set-up is Nest Cam's secret sauce -- they promise a 60 second set-up and that's pretty much what we found in our testing," Baby Bargains says. Still, "Nest Cam isn't a perfect solution as a baby monitor." In addition to the signal dropouts, Nest Cam's audio cuts out anytime your phone's screen goes to sleep. It also drains the battery, Baby Bargains says, so you'll have to leave your device plugged in all night. The camera is fixed – it won't swivel – and the audio can lag behind by 3 to 5 seconds, depending on your router's speed.
Monitors for babies should have good video images that are clear and true to life, but they should also have quality sound that is easy to hear and clear enough that parents can quickly decide if they need to look at the viewing screen, go back to sleep, or get running to the nursery. So while you might consider video quality to be the most important metric for this kind of product, we rated both video and sound equally because, without one, the other doesn't much matter. If the sound is muffled, difficult to decipher, or not loud enough, then parents might miss baby's cries. If sound activation or thresholds for background noise don't work as described, then parents might lose sleep listening to a loud monitor. However, once alerted, you need a clear view of baby with enough details to determine baby's needs, day or night, or the video style monitor isn't much better than a sound only monitor.
The range of a product can make or break whether or not you can use certain options in your home. Depending on the distance from your room to the baby's nursery and the construction of your home or interfering appliances, you could be limited in your options of what will work for you. If your house is large or has more than a handful of walls between the two room, you'll be stuck with a Wi-Fi option only (assuming you have Internet). If your home is smaller or has fewer walls, then you'll have more options. Many of the wearable movement choices work in the baby's room and are not dependant on communicating with a parent device. However, if your room is out of earshot, then you'll never hear the alarm go off making the unit virtually useless without a sound monitoring addition. Choose your product carefully if you think the range will be an issue and purchase from retailers like Amazon that have a generous return policy. Also, don't let it sit in the box, try it out right away and send it back immediately if it doesn't work in your space. Do not rely on the manufacturer's range claim, as we have found these claims to be wildly inaccurate for many brands during our testing.
Our hands-on reviews put 32 video baby monitors to the test, examining their features, image clarity (day and night vision), convenience, reliability, safety, the range of reception, and versatility. We came away with over 15 of the top baby monitors of the year, including the top-ranked Infant Optics monitor to the super versatile Project Nursery monitor.
Both Kay and Baldwin chose the Infant Optics DXR-8 as their top choice in video baby monitors (it also has nearly 24,000 4.4-star reviews on Amazon). The DXR-8 uses secure 2.4 GHz FHSS wireless transmission (as opposed to Wi-Fi) to send crystal clear color video and audio to the receiver, has a solid battery life, allows for remote pan, zoom, and tilt capabilities, and comes with an interchangeable zoom lens (with a wide-angle lens sold separately). Other features include a two-way intercom, remote temperature display, and the option to set the monitor to audio-only.
×