iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
Using the speaker, you can tell the Project Nursery camera to pan and tilt, play a lullaby, check the temperature in the nursery and more. You can do all this from any room that has an Alexa-powered speaker, so that you don't need to enter the nursery and risk waking up your sleeping baby. If you already own an Echo speaker, Project Nursery sells the Alexa-enabled camera on its own.

Testing battery life for all the monitors was for the parent device only. While some of the dedicated options have a battery in the camera in the event of a power outage, most do not, and they are not intended for use as an all-night option. So while we would support a cordless camera for monitoring baby, due to safety concerns with babies and strangulation hazards, none of the products in our review offer this.

There are many factors to consider when purchasing a video monitor for your child. These products range in price from around $40 up into the hundreds, and they come with a variety of features, such as WiFi connectivity, dual cameras, long-range monitoring and more. The following is a breakdown of the top video baby monitors available and the best features of each option.


But, for many parents, a baby monitor is a part of daily life. A baby monitor gives you a camera and/or microphone near the crib, and a separate rechargeable parent unit (aka, a monitor) that connects wirelessly and can travel with you throughout the house, either working while plugged in or running off its battery. It's nice to see your children in bed, dreaming happily, sleeping in adorable new positions, cuddling with animals, and generally doing okay.
Alex Colon is the managing editor of PCMag's consumer electronics team. He previously covered mobile technology for PCMag and Gigaom. Though he does the majority of his reading and writing on various digital displays, Alex still loves to sit down with a good, old-fashioned, paper and ink book in his free time. (Not that there's anything wrong wit... See Full Bio
General Usability: This one is two-fold. First we wanted to make sure each monitor could perform under bright, dim, and no light; and pick up even the faintest sounds. Then we looked at how easy it was to use the monitor. Could we adjust the screen brightness, or were we going to be half-blinded when we picked it up at 1AM? Was the monitor voice-activated, or does it pick up white noise in the background? How sensitive were the alarms, and did they sound like a baby-waking screech or a soft ping?

When it comes to video monitors, you'll want to make sure that the one you're buying offers night vision and a decent resolution. Most baby monitors with a dedicated viewer sadly have low VGA resolutions, which are much worse than the majority of smartphones you can buy these days. A few have a 720p HD resolution, which is decent. We hope more baby monitors go that route in the future.
At the end of the day, if all you want is a no muss no fuss monitor that most parents will be able to set up and use quickly, then either Wi-Fi option will work. However, if you just want to plug it in and have it work without the need to learn something new, then the award-winning Philips Avent SCD630 or the Best Value, Levana Lila, will get the job done simply and fast. The cheaper price tag and simplicity of fewer buttons (easier to use) on the Levana Lila make it a great option as a secondary monitor for Grandma or travel.
The Arlo Baby camera, which comes dressed as an adorable green bunny, connects to your wireless internet and connects to your phone via the associated app. It streams 1080-pixel video footage, even at night, and has an 8x zoom to let you see exactly what’s going on in the nursery. There’s a two-way talk feature, night light and smart music player, as well as an air sensor and baby crying alert, letting you keep a watchful eye on your little one.
The BabySense (and other mattress sensors) require a hard surface under the mattress to work, and they don't work with all mattress types so you'll need to research your mattress to ensure it is compatible. This option is also not good for travel because of these special considerations. This product doesn't have a parent unit which means the alarm happens in the nursery with your little one and could be traumatic to sleeping little ones. If you want a movement device that works well and has a longer life than the wearable options, then the BabySense 7 is a great way to get the job done with minimal fuss.
The Infant Optics’s range within our test houses was never an issue, and, as with others we tested, we had to walk outside and down the street before losing the signal. The image quality was good enough to make out facial details 6 feet away in a completely dark room (as it was on others we tested). It’s easy to add more cameras to the set (you can use up to four Infant Optics add-on cameras, which are separate purchases, usually for about $100). You can mount the camera on a wall easily, pan and tilt 270 and 120 degrees respectively, and you can set the parent unit to scan between multiple cameras to keep an eye or ear on everybody at once—another nice feature that’s not unique to this model.
It’s hard not to like the crystal-clear picture you get on this monitor’s 7-inch screen (the biggest screen on this list!). Its standalone camera can be moved from room to room and will remotely pan, tilt and zoom. Given the cost, this monitor is best if you want full control of the nursery environment. It syncs with the Smart Nursery humidifier and the Dream Machine sound and light machine. Once connected, you can turn on lullabies, project lights onto the ceiling and increase the room’s humidity all from your monitor.
×