During our tests, we found ourselves among the fraction of buyers having problems with the display on the DXR-8. Our first test unit worked fine out of the box, but after a couple of hours running on battery, the display became distorted and nothing would fix it. Likewise, you’ll find a few complaints on Amazon of users experiencing dead pixels after about a year of use (here’s one and here’s another). The good news: Those folks reported that Infant Optics replaced their monitors even though some were out of warranty. In fact, the company consistently receives decent feedback on customer service. Infant Optics quickly replaced our faulty unit (but as a media inquiry, that’s not comparable to typical customer service), and the new unit has performed fine.
A WiFi monitor gets rid of the parent unit entirely and replaces it with a smartphone app. That app connects to the baby unit over the internet, rather than standard radio frequencies. As a result, you’ll never have to worry about being out of range from your camera. If you’re at dinner and want to check in on the babysitter, you’re still connected. Since it operates from an app, it’s also easier to flip through features than trying to figure out a finicky, low-quality touchscreen, or a dozen different buttons.
The Snuza Hero SE is a wearable device that clips to baby's diaper or bottoms. It has a unique vibration alert that attempts to rouse little ones into moving enough to stop the impending alarm that will sound audibly if the baby doesn't move. This vibration feature means that false alarms may be less likely to result in a crying baby, though they could cause lack of deep sleep if they happen continually. The Snuza is a nice wearable choice that is easy to use, portable, and didn't have many false alarms during our testing. While it is not a replacement for safer sleep practices, it could provide some parents with increased peace of mind for a better night's sleep.
All of the products in our review have features for convenience and overall function, but some also offer features for fun or additional information. All of the products have night vision with sensors for automatic adjustment with light changes, and all offer 2-way communication with baby through the camera. Some of them come with lullabies, and others have nifty temperature and humidity sensors. Overall, whatever you might be looking for, or never knew existed but now want, can probably be found in the products we tested.
Credit: NetgearCuteness aside, the Arlo Baby is compact enough to fit into even the most crowded nursery; a wall mount is included if you prefer that option. While you plug the camera in to power it, you can also detach the camera and move it into any room where an impromptu nap occurs, though we only saw three hours of battery life when we tried this out.
As with any internet-connected device that watches or listens to your home, it's not out of the ordinary to be somewhat wary of a smart baby monitor. All Internet of Things (IoT) devices are potential soft spots for hackers to monitor you. Anything you network can possibly be compromised, and while you shouldn't be afraid of an epidemic of camera breaches, you should always weigh the convenience of these devices against the risk of someone getting control of the feed.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
The most reliable type of movement sensing product is the mattress pad option. This product is placed under the mattress, usually on a hard board and will only work with some types of mattresses. This unit relays messages to a nursery device that alerts parents on a parent device or with an alarm in the nursery (model dependent). The BabySense 7 is a good example of a sensor pad that works under your baby's mattress.
The Infant Optics’s range within our test houses was never an issue, and, as with others we tested, we had to walk outside and down the street before losing the signal. The image quality was good enough to make out facial details 6 feet away in a completely dark room (as it was on others we tested). It’s easy to add more cameras to the set (you can use up to four Infant Optics add-on cameras, which are separate purchases, usually for about $100). You can mount the camera on a wall easily, pan and tilt 270 and 120 degrees respectively, and you can set the parent unit to scan between multiple cameras to keep an eye or ear on everybody at once—another nice feature that’s not unique to this model.
If you sleep in the same room as your baby or live in a small enough space that you can always hear or see what your baby is up to, you probably don’t need a monitor. Otherwise, most parents enjoy the convenience a baby monitor provides—instead of needing to stay close to the nursery or constantly checking on your child, you’re free to rest, catch up on Netflix or get things done around the house during naptime. Monitors can also double as a nanny cam to keep an eye on your child and their caretaker.