Beyond that, we wanted to hear from an expert on the products’ (perceived and real) security risks. So we spoke to Mark Stanislav, the director of application security for Duo Security and the author of Hacking IoT: A Case Study on Baby Monitor Exposures and Vulnerabilities, whose research has been featured in The Wall Street Journal, The Associated Press, CNET, Good Morning America, and Forbes.
The audio is quite good as well, with very little distortion. As with other Wi-Fi video baby monitors, there is lag as the video stream travels through distant servers before reaching your smartphone. In our tests, the SCD860 had good results one moment and issues shortly after. This is one of the reasons we gave it a low score for connection quality. A few of our testers had trouble setting up this baby camera using the smartphone app. The camera doesn't work without a wireless connection, unlike traditional video baby monitors that use a handheld receiver. The app is easy to use, and it lets you set up push notifications and adjust the sound sensitivity. We had a few connection issues independent of our Wi-Fi connection, which could cause concern. For a time, we had no connection, so we didn't know what was going on in the other room. This monitor lets you track the temperature and humidity in your baby's room and has a nightlight with multiple light color options. If your baby is upset, you can use the app to talk to them or play one of the 10 lullabies through the camera's speaker. The Philips Avent Smart baby monitor SCD860 has a two-year warranty, which is the longest of all the models we tested.
When shopping for baby monitor, try to choose a product that offers both quality and security. For best results, opt for a model that offers both audio and video capabilities. You should be able to see and hear your baby in real time and also talk back to them as needed. Baby monitors can vary dramatically in quality, but today's models offer stunning HD video that ensures you can see your baby's surroundings with crystal clarity. Purchase the best quality you can afford, and enjoy the peace of mind that comes from knowing that your baby is closely within reach.
This unit only works until little ones can roll or crawl. It can be uncomfortable for some babies or ineffective if little ones are too small or their diapers don't fit well. We worry parents will rely on this kind of device to prevent SIDs and caution you that there is no evidence that it does or can prevent the incidence of SIDs. However, if you want to know when your little one is moving at a predictable rate, and knowing may help you sleep better, then the Snuza could be the right option for you that won't break the bank or require adjustments to your nursery.
This monitor comes with a 2.4" color screen that connects to its camera over a secure, interference-free connection, providing you with video up to 900 feet away. It boasts a two-way talk system and night vision, as well as several extra features like temperature monitoring, voice-activation mode, 2x zoom and more. The manufacturer doesn’t specify how long the battery on this video baby monitor lasts, but reviewers say you can get around six hours of continuous use from it.
As much as new parents want to be in the room with baby at all times, sometimes a baby monitor is necessary (like when you’re having a dinner party — or just want to watch Insecure in the next room). To help navigate the vast, confusing universe of baby monitors, we spoke to Lauren Kay, the Bump’s deputy editor, and Dave Baldwin, Fatherly’s former gear-and-tech editor and current play editor, about their recommendations, from traditional video monitors to smart-tech-enabled devices that can even track how your baby is sleeping. Add one of these to the baby registry.
Sound devices relay what is happening in baby's room via sound only. A great sound option is quiet unless the baby is making noise so that you won't be disturbed by white noise or constant static. This basic monitoring type can be all you need if your goal is being alerted when your baby is crying and needs your assistance. This style can be elementary with sound only like the V-Tech DM111 or it can have bells and whistles like a nightlight, 2-way talk, lullabies, and mic sensitivity adjustment features like the Philips Avent DECT SCD570/10. Most parents can get by with a sound only device as it provides the information you need to determine if your baby needs you or not.
Security: Whether you’re skeptical of people hacking baby monitors or deeply concerned about it (and there are stories!), the bottom line is that some monitors are at more risk than others. A Wired story from 2015 refers to security firm Rapid7’s findings that Wi-Fi–enabled monitors were particularly vulnerable. We figured people would prefer the not-hackable type, and we talked to a security expert about how to protect your privacy.
The Nest Cam Indoor Wi-Fi and the LeFun C2 720P Wi-Fi came in a close second to the iBaby M6S Wi-Fi for features, both scoring an 8 of 10. Because these cameras are designed more with surveillance in mind and are not solely marketed for baby, they have several features that make parents lives easier, but not anything fancy and fun for baby. They do offer 2-way communication, but no lullabies or environmental sensors. Given that many parents already have "noise makers" (aka lullabies) covered by way of another product, the lack of this feature isn't a deal breaker in our book. So while these Wi-Fi cameras lacked the gadgetry fun of humidity sensing and the other bells of the iBaby M6S Wi-Fi, they still got the job of monitoring done in a way that is easy for parents to use. The bonus of the Nest Cam Indoor Wi-Fi camera is that it can be used for multiple applications when baby gets older and no longer needs an overnight monitor. This monitor can easily shift for use as a nanny cam, security, or pet camera. We think this takes the sting (if there is some) out of its lack of baby fun features, which in the end, most parents usually stop using when the novelty wears off.
This is an excellent baby monitor that uses many of the same principles as the Nanit, Nest Cam, and Cocoon Cam. It uses a cute and innovative video camera on a flexible stick that can hook around the top of the crib, bend into an upright stand, or mount onto the wall with an included mount. This versatility is great for the different stages of development, and it can be flexibly used as a security camera or baby monitor. For new babies that aren't old enough to stand up and grab the camera, it can be mounted right on the crib's upper rail, giving you the perfect view onto your sleeping baby. Then for child safety, it can be moved to the wall or on top of a nearby dresser, to stay out of baby's curious hands and give you a good vantage point into the crib. The camera hooks into your existing home wifi, and you use your smart phone to connect (there's a cell phone app for the iPhone or Android). If the camera and your phone are both connected to your home wifi, you will get real-time streaming within your home, and you can turn on privacy mode to keep the signal from traveling to the cloud for processing (i.e., it will stay in your local area network, the signal never leaves your home). This makes the stream much faster, but also makes sure that it will still work during an internet outage. When you leave your house and connect to your cellular carrier or to a different wifi, the camera's signal will travel through Amazon's cloud computing service then get bounced down to your phone's app. The cloud computing does two things. One is that it makes it possible for you to remotely connect to see your live camera wherever you are, as long as you have your phone. Second, it will analyze the sound to check for crying and send you an alert when any fussing is detected. And it seems pretty specific to crying, rather than sending alerts whenever there is a little other noise (like a door closing). It also saves little 30-second video clips from when the crying was detected, so you can go back (like with a DV-R) and see what was going on. Nice touch! And that cloud service is completely free to you, paid for by Lollipop. The digital video is streamed in high definition (720p), and we found that it has generally good video and digital audio sound quality. Even the night vision is really pretty great. One of the features we really liked, and we didn't find on any other wifi baby monitor, was the ability to stream just the audio overnight (audio mode for night nursery). So your smart phone screen can be off, and you can just use it as a basic audio-only monitor; that's a nice feature to save your phone's battery life and keep the bright screen from turning on in the middle of the night. In our testing, this worked really nicely, but it's worth noting that it only works in this mode when you are on the same wifi connection as the baby camera (i.e., you're at home). We found the video quality to be very high, though the "real-time streaming" did sometimes get a little delayed by a few seconds, especially when streaming through the cloud to our iPhone on a 4G connection. A few cool things worth mentioning. Mounting was easy, no more drilling into the crib or using adhesives. You can buy a separate sensor for about $55 that will tell you some additional information about your baby's room, like room temperature sensors, and air quality and humidity sensors; it connects to the camera via Bluetooth. You can also play sounds for your baby through the app, like white noise, trickling water, or even the sound of the vacuum. You can also setup multiple cameras to view on the same app (not at the same time though). So there are tons of great features here, and overall we thought it worked really well in our testing. Drawbacks? Well, it is a little pricey coming in around $150, just like the Cocoon Cam. It also can get pretty laggy when streaming through cellular networks, but that's not really Lollipop's fault. Note that the one currently available on Amazon as of July appears to be a knock-off Lollipop camera, in the meantime, you might need to purchase one directly through the Lollipop website. This camera deserves a much higher spot on our list, but we're worried about where you can actually get a genuine version of the monitor - we're in touch with the company and will update when we hear some news. So overall, this is a great new baby monitor with wifi that you will very likely be pleased with. We'll update this article in 6-months to talk about long-term reliability. Interested? You can check out the Lollipop Baby Monitor here.
The video on its handheld unit is sharp and consistent, and even with 30 feet between the camera and the handheld unit, there wasn’t lag or interruption in the video. In addition, you can use the handheld unit to remotely point the camera at different parts of the room. Although you can't record video or take pictures with the DXR-8, these aren’t important features for a baby monitor. Setup is incredibly easy. After charging the handheld unit overnight, we plugged in the camera and it instantly connected. There was a slight lag in the video when the camera and handheld unit were 50 feet apart, which is why it only scored 90 percent in our connection test, but that’s still better than other baby monitors we reviewed. In our battery life test, the monitor lasted 10 hours – only one other model has a battery that lasts this long. This video baby monitor doesn't have Wi-Fi, but that's not a problem. Our top Wi-Fi monitor, the Philips Avent, is more expensive and didn't perform as well as the DXR-8 in our tests. This baby camera has swappable lenses for telephoto and wide-angle views. It also has invisible infrared LEDs that let you see your baby in complete darkness without waking them. The DXR-8 doesn't have a nightlight or lullabies to comfort your baby, but those exclusions don't make this baby monitor any less impressive. The warranty on the DXR-8 only lasts a year, compared to the two-year warranty on the Philips Avent.
The best baby monitor apps allow you to monitor baby using only your existing devices, like phones, tablets or even computers. One device acts a transmitter in baby’s room, and you use another device to monitor baby. Some apps only have audio functionality, but others have both audio and video. As a plus, the best baby monitor apps often have cool features that traditional baby monitors don’t have, like remote capabilities. However, some users complain that they can be somewhat unreliable.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
The video on its handheld unit is sharp and consistent, and even with 30 feet between the camera and the handheld unit, there wasn’t lag or interruption in the video. In addition, you can use the handheld unit to remotely point the camera at different parts of the room. Although you can't record video or take pictures with the DXR-8, these aren’t important features for a baby monitor. Setup is incredibly easy. After charging the handheld unit overnight, we plugged in the camera and it instantly connected. There was a slight lag in the video when the camera and handheld unit were 50 feet apart, which is why it only scored 90 percent in our connection test, but that’s still better than other baby monitors we reviewed. In our battery life test, the monitor lasted 10 hours – only one other model has a battery that lasts this long. This video baby monitor doesn't have Wi-Fi, but that's not a problem. Our top Wi-Fi monitor, the Philips Avent, is more expensive and didn't perform as well as the DXR-8 in our tests. This baby camera has swappable lenses for telephoto and wide-angle views. It also has invisible infrared LEDs that let you see your baby in complete darkness without waking them. The DXR-8 doesn't have a nightlight or lullabies to comfort your baby, but those exclusions don't make this baby monitor any less impressive. The warranty on the DXR-8 only lasts a year, compared to the two-year warranty on the Philips Avent.
If your internet goes down, your baby monitor goes down. A wifi baby monitor uses your home's internet connection to communicate to servers, then to your app. So if your internet connection goes down, then you will no longer be able to stream video of your baby. That's a huge consideration to keep in mind because you never know when your internet will slow down or simply stop working for several minutes or hours, and you will be stuck without a working baby monitor. There are a few wifi baby monitors that will still communicate locally (within your home's network) when the internet goes down, such as the Lollipop or Nanit. They do this by switching from internet to local area network when an outage is detected, so you can have confidence that if you're connected to your home wifi you'll still see your baby.
Security is a mixed bag, especially as baby monitors get more high tech. If tech giants like Apple and Google run into security flaws, high-tech baby monitors are sure to experience similar problems. However, some less high-tech baby monitors aren't secure, either, and many suffer from signal interference. We've checked each company's security policy to find the most secure options for you.
We were also disappointed that the Angelcare’s parent unit lacks an out-of-range warning. If you’re in the backyard or basement and the monitor disconnects, it’s not clear whether you’re looking at a napping baby or a frozen screen. Still, it beat out the Baby Delight for sound and video quality and offers a few customizable features: You can adjust the volume on the baby unit as well as the parent unit, and set up timed alarms and temperature alerts.
The Samsung's display, at 5 inches, is among the largest and crispest you'll find on a baby monitor. However, the touchscreen response is sluggish, which makes it difficult to smoothly pan or tilt the camera. And when you pull up the menu, you lose the video and the audio output—that's a weakness compared with our pick, which continues to display video and play sound while navigating menu functions.

The Nest Cam Indoor Wi-Fi tied for the high score in this review with the iBaby M6S Wi-Fi. This monitor earned the high score for video quality, range, and battery life, with second place scores for ease of use and features. Its impressive performance helped it win the Top Pick award for Long-term Use. The Nest is a cool surveillance camera you can use to watch your baby, but given that it isn't specifically designed with baby in mind, it lacks some of the fun features parents may want like lullabies and nightlight. The Nest Cam offers motion detection, sound activation, 2-way talk to baby, and 8x digital zoom. The Nest Cam camera can not be controlled remotely, but instead relies on a large field of view you can zoom into and then search in a way that looks similar to pan and tilt. The downside to this camera is it does not continue to monitor if you use another app or take a phone call making it hard to use full time if you only have one device, so we recommend using a device other than your phone for consistent baby viewing. The Nest Cam is the most expensive Wi-Fi monitor in the group, but it is still cheaper than 3 of the dedicated monitors, and its long-term use possibilities make it an investment we think parents will use for years to come as a nanny cam, home security feature, or checking in on pets.
Like most other product review sites, ConsumerSearch is supported by a combination of commissions on the sale of the products we recommend and ads that are placed on our site by Google. If you find something you like, you can help support us by clicking through and buying the products we pick. Our editorial process is independent and unbiased; we don’t accept product samples, requests for reviews or product mentions, or direct advertising.

The Infant Optics DXR-8 has a superior battery life to any of the other video monitors we tested, as well as a simpler monitor interface that's more intuitive and easier to navigate than those found on competitors. The range, image quality, price, and many other features are comparable with those of the best competitors. Other good qualities include a basic but secure RF connection, an ability to pair multiple cameras, and simple tactile buttons.

With a baby monitor, you're able to keep tabs on your little one(s) during nap time or nighttime, and still go about your day. Generally, the number one benefit provided by the best baby monitors are peace of mind, followed closely by the benefits of security and convenience. Plus, since homes and habits vary, a baby monitor may have additional uses, like allowing you to monitor how long it takes your preschooler to fall asleep, keeping track of playtime, or even using it as a pet cam.
The iBaby M6 Wi-Fi is a Wi-Fi camera designed with nurseries in mind, something not true of the Nest Cam. This camera is easy to use, works with your internet for connectivity anywhere and has features that are baby-centric. The iBaby tied with the Nest Cam Indoor Wi-Fi in our review, but the iBaby is a better option for parents who want a camera designed for watching a baby. The iBaby includes sensors for temperature, humidity, and air-quality (things to watch when setting up best sleep practices). It has different lullabies included, and you can add your own songs, voice, or stories with minimal effort. This option has an intuitive interface and works well on your personal device with continual use even while running other apps. You can even take pictures or video of your little one in action or peacefully dreaming. You get all of this with a list price below the Nest Cam making it a good choice for parents who want a Wi-Fi option but are less concerned with longevity.

All of the products in our review have features for convenience and overall function, but some also offer features for fun or additional information. All of the products have night vision with sensors for automatic adjustment with light changes, and all offer 2-way communication with baby through the camera. Some of them come with lullabies, and others have nifty temperature and humidity sensors. Overall, whatever you might be looking for, or never knew existed but now want, can probably be found in the products we tested.
Netgear brought the best features of its Arlo line of home security cameras to its first baby monitor. That includes Full HD video, night vision, sound and motion detection, two-way audio, 24/7 recording, and free cloud storage. Netgear also used feedback from Arlo owners to add a nursery-centric spin to the Arlo Baby, with a multicolored LED nightlight, a built-in music player with nine lullabies, environmental sensors, and artificial intelligence that can recognize your child’s cries.
Ease of use may not seem like a big deal because once you know how to use something, it won't seem that hard, and after you use it for a while it can feel intuitive even if it isn't. However, with this type of product, there can be a learning curve depending on what kind you choose and how many features it has. While the dedicated monitors were plug in and go options that even grandma can manage, some of them took a little more skill to navigate and learn. The Wi-Fi options, on the other hand, do require some knowledge of technology and the way apps work. With all of them, you will need to set up the camera with your computer or another device, and you will need to set up an account and be able to manage things like Wi-Fi passwords and various settings inside the application. While this may seem like no big deal to some parents, it could be challenging for those that are less tech-savvy.

Searching for a big-screen video baby monitor that will stay put in one place, like on your bedside table, in the kitchen, or living room? And won't break the bank? Then this is the one for you. It has a sleek and truly large 7" display, that looks like a digital picture frame, and is about the size of an iPad Mini. We found the video to have a great quality signal, the monitor to be high resolution for good visibility, and the night vision to work reasonably well (it's grayscale, not greens, but still sufficient to watch baby sleep or check status). It was also really easy to setup, simply plug in the camera, and plug in the video monitor, and you're all set. It comes with great features: it has an integrated two-way audio intercom system, a sleep mode that dims the screen but leaves on the audio, adjustable volume, and adjustable wireless channels to ensure signal clarity even with interference from other devices. In our test, we found everything in this baby monitor system really easy to learn and use, and really enjoyed the "talk" feature that allowed us to talk to our baby in the other room. There were three primary drawbacks, however: first, it is a stationary system, meaning that the display does not have a battery. This is the biggest drawback relative to the above systems. You can move it from room to room, however, as long as you bring the (albeit short) power cord. Second, unlike most others on this list, it does not allow you to remotely control the camera tilt or zoom. Finally, the overall quality isn't up to par with the others on the list. The sound quality wasn't so great, the image sometimes choppy, and the night vision somewhat poor quality relative to others. Overall, it has some great features, and if you're looking to save a bunch of money for a decent video monitor that isn't super versatile, this is one of the best baby monitors for bang for the buck!  


Relatively new to the market, this Philips Avent baby monitor has some really great features. Philips Avent has a long history of making high-quality baby gear and home products, including their great (non-video) DECT monitor, and this one is no exception. When we unpacked this baby monitor, it took us about 20 seconds to set up. We put the screen unit in the dining room and the camera in the nursery. Plug both of them in and you're off to the races. The digital color screen looks very good, with a high resolution 720p, and pretty good night vision. If you can't see closely enough, you can remotely zoom in by about 2x; but note that if it's not lined up perfectly this won't be so helpful since you can't remotely pan or tilt the camera to get your baby into view. Some additional features include private, secure connection, and very clear sound so you can hear your baby's every little peep. One of our favorite features was the ECO mode, which saves power in the screen unit by shutting off the screen and sound. Only when it detects a sound from your baby will it turn on to notify you. This is a great feature when you're using the hand-held screen unit with battery only, unplugged from the charger. Though we'd probably never need it, you can also remotely turn on some soothing lullabies (twinkle-twinkle, rock-a-bye baby, etc). Limitations? Well, the Philips Avent doesn't let you add multiple cameras, and the video quality isn't quite on par with some of our better-ranked units. It's high resolution digital color video, but if the signal and screen quality aren't so great (in terms of contrast, brightness, signal strength, etc) then it won't look very nice. Overall, however, a highly recommended video monitor that deserves its place on this best baby monitor list, from a company with a good track record of making safe and reliable baby products.

However, a closer look at the flaws noted in the iBaby’s negative reviews—currently, one-star reviews make up roughly 25 percent of the total—pushed us even further toward the Infant Optics as the one we’d choose for a similar price. The app is pretty poorly done. You may lose a connection even with a perfect Wi-Fi signal. Some people report never being able to connect to it at all. The plug on this unit is an odd 2-piece design that is unnecessarily complicated (but it can be fairly easily replaced with another basic 5V charger if you want). All told, the M6S comes close to the functionality of the Infant Optics pick in some ways, and the ability to access the camera remotely is a huge plus, but all the other drawbacks are too much to overlook.
This Internet site provides information of a general nature and is designed for educational purposes only. If you have any concerns about your own health or the health of your child, you should always consult with a physician or other healthcare professional. Please review the Terms of Use before using this site. Your use of the site indicates your agreement to be bound by the Terms of Use.
The LeFun camera connects to your WiFi, and you use the associated app to watch real-time footage in 750-pixel high definition. Because the product uses WiFi to transmit video, you don’t need to worry about walls obstructing the signal. The camera can pan an impressive 350 degrees and tilt 100 degrees, and it also has night vision that many reviewers say works well.
The iBaby M6S Wi-Fi is the number one video monitor out of the 9 competitors in this review. This monitor earned top scores for range, ease of use, features, and battery life with a second-place score for video quality. The iBaby's impressive performance during testing and subsequent overall high score resulted in it winning an Editors' Choice award for best Wi-Fi monitor. This cool Wi-Fi product is the only one we tested specifically designed with baby in mind. It features humidity, temperature, and air quality sensors to help ensure baby stays cozy, and it comes with 10 lullabies and the ability to add your own music and voice. The iBaby is easy to use, has true to life images, and works as it should. It offers sound activation, motion detection, 2-way talk to baby, and a remote control camera. The iBaby will continue to monitor baby even with another app running. If that weren't enough, this fun looking camera has a reasonable price point, coming in cheaper than half the competition we reviewed.
This baby monitor system lets you listen in on your child with a “smart audio unit,” or you can install the Safety 1st companion app to turn your smartphone into a video display, complete with motion and audio alerts. While it lacks some of the nonessential features of the Arlo Baby, we give it high marks for its excellent video quality, customizable alerts, and its ability to grant regulated camera access to other caretakers.
Sound activation is a feature we think parents should consider. This feature creates a quiet monitor unless the baby is actively making noise and translates to parents potentially getting more sleep because they aren't kept awake by ambient noises. Having sound activation means you only hear what you want to. This feature can be found in dedicated and Wi-Fi monitors.
As with any internet-connected device that watches or listens to your home, it's not out of the ordinary to be somewhat wary of a smart baby monitor. All Internet of Things (IoT) devices are potential soft spots for hackers to monitor you. Anything you network can possibly be compromised, and while you shouldn't be afraid of an epidemic of camera breaches, you should always weigh the convenience of these devices against the risk of someone getting control of the feed.
×