While buying an audio-only monitor in 2018 is slightly akin to buying a flip phone, the Philips Avent has pretty much all the same features as top-of-the-line camera baby monitors, sans camera. Even better, it uses DECT (Digital Enhanced Cordless Communications) technology to guarantee zero interference ⏤ so it won’t get crossed with other signals in your house and/or your neighbor’s cordless phone. The Philips has a range of more than 90-ft inside, a 10-hour battery life, and it uses a “cry mode” so you’re only alerted to real cries for attention rather than background noise. As for extra features, it includes a night light, in-room temperature monitor, and plays lullabies ⏤ if only you could just see the baby.
As a parent, your baby’s health and safety are of paramount importance. Therefore, you and other parents may use a baby monitor to make sure that your kids are safe and sound. There are many baby monitor options available including those from brands such as Samsung and Motorola, so it is important to know what features these models have to make the right decision for your family.
The iBaby’s video and audio quality were among the best in the WiFi group, but like all WiFi monitors, quality and how well it displays real-time action depends largely on your internet quality and speed. Our testers only experienced a delay of less than a second, more noticeable than HelloBaby’s, but nowhere close to Motorola’s three-second delay.

Clarity of Daytime and Night Vision: When wireless baby monitor systems with screens were first introduced onto the market they used somewhat outdated display technology that made for a grainy, distorted and often unreliable picture. Newer baby monitors use a liquid crystal display similar to the ones used in your smart phone and other consumer electronics, so these HD video baby monitors tend to have very nice color contrast and high resolution, and are also substantially more reliable. All of the stand-alone baby monitors we list above have high-quality displays, and we do not recommend some of the relatively old fashioned ones that can still be found on the market. Of course, night vision doesn't use color - so the display will be either grayscale or show a slightly green hue. That's important to keep in mind before you try it out for the first time; not even military special operations have color night vision, so don't expect anything amazing, even from the best baby monitor!

In terms of bang for your buck, it’s tough to beat the Babysense. For less than $100, it comes loaded with bells and whistles more commonly found on higher priced models. Not only does it boast a 2.4-inch HD LCD color screen with infrared night vision, pan/tilt, and 2x zoom, but it includes two-way talk back, a sound activated ‘Eco’ mode (the screen stays off) to save battery life, 900 foot range (with out-of-range warning), and an in-room temperature monitor that sends alerts if it gets too hot or cold. It uses 2.4 GHz FHSS wireless transmission for security and even comes with both a built-in alarm/nap timer and lullabies.
We wanted to recommend a less expensive video monitor, but at any price notably lower than our pick, every product we tried had such serious problems—usually, poor video quality and ongoing connection issues—that we feel a higher end audio-only monitor offers a much better value for a limited budget. The VTech DM221 audio monitor is the best choice in the category—it’s consistently a best seller at multiple retailers, with strong reviews (four out five stars over 4,703 reviews on Amazon) and similarly high ratings at Walmart, Target, and BuyBuy Baby.
But, for many parents, a baby monitor is a part of daily life. A baby monitor gives you a camera and/or microphone near the crib, and a separate rechargeable parent unit (aka, a monitor) that connects wirelessly and can travel with you throughout the house, either working while plugged in or running off its battery. It's nice to see your children in bed, dreaming happily, sleeping in adorable new positions, cuddling with animals, and generally doing okay.
This video baby monitor streams real-time footage to a 3.5" color display without connecting to the internet. The product’s battery will last around six hours if the display is always on but can last up to 10 on standby, and it’s range is up to 700 feet, though parents note it doesn’t reliably transmit a signal through numerous walls. In addition to providing high-quality video, the camera has an alarm function, two-way talk, a temperature monitor, and night vision. You can remotely adjust the camera’s angle or zoom with the controller, and if you want to use it as a regular baby monitor, you can turn off the video function.
Why spend money on a baby monitor, which serves a single specific purpose, when you could use an indoor home-security camera that you can repurpose once your kid leaves the nursery? We wondered the same thing, so along with with dedicated video baby monitors, we tested a Nest Indoor Cam, currently among our top-rated wireless home security cameras.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio

While digital monitors minimize the possibility of unwittingly broadcasting images and sounds to other devices, any wireless device (analog or digital) can interfere with other wireless devices, such as your baby monitor, cordless phone, wireless speakers, or home wireless router. To solve the problem, first, try changing the channel on your baby monitor or on your router. If you still have interference and you can't return the monitor, try keeping other devices as far away from your baby monitor as possible.
Video monitors give a quick and silent look into baby's world without leaving your cozy bed or disturbing the baby. If a trip to the nursery is warranted, you haven't lost much time, but if the baby is just adjusting, then you can go back to sleep without getting up. Getting good sleep, or as much sleep as possible can be the difference between a great newborn experience and feeling like a new parent/zombie failure.

Ease of use may not seem like a big deal because once you know how to use something, it won't seem that hard, and after you use it for a while it can feel intuitive even if it isn't. However, with this type of product, there can be a learning curve depending on what kind you choose and how many features it has. While the dedicated monitors were plug in and go options that even grandma can manage, some of them took a little more skill to navigate and learn. The Wi-Fi options, on the other hand, do require some knowledge of technology and the way apps work. With all of them, you will need to set up the camera with your computer or another device, and you will need to set up an account and be able to manage things like Wi-Fi passwords and various settings inside the application. While this may seem like no big deal to some parents, it could be challenging for those that are less tech-savvy.


Users consistently report being impressed with the crystal-clear quality of the MoonyBaby monitor and the special features this particular model comes equipped with, including a baby room temperature display, zoom capabilities, a talk-back button, long-lasting battery life, and five soothing built-in lullabies. With so many advanced features and the ability to link to up to four cameras at once, it’s no wonder the MoonyBaby is on so many parents’ wish lists.

The DM111 is a basic bare-bones sound option that does exactly what a sound product should do. It relays the sounds from your baby's room to the parent device with no muss no fuss and good sound quality. With a simple plug and play design, it is hard to mess up making it a great choice for parents who aren't technology savvy or for grandma who might find more complicated products frustrating. This product is the cheapest option in any of our reviews for monitoring products, but you won't be sacrificing sound quality or usefulness for the price.
This is an excellent baby monitor that uses many of the same principles as the Nanit, Nest Cam, and Cocoon Cam. It uses a cute and innovative video camera on a flexible stick that can hook around the top of the crib, bend into an upright stand, or mount onto the wall with an included mount. This versatility is great for the different stages of development, and it can be flexibly used as a security camera or baby monitor. For new babies that aren't old enough to stand up and grab the camera, it can be mounted right on the crib's upper rail, giving you the perfect view onto your sleeping baby. Then for child safety, it can be moved to the wall or on top of a nearby dresser, to stay out of baby's curious hands and give you a good vantage point into the crib. The camera hooks into your existing home wifi, and you use your smart phone to connect (there's a cell phone app for the iPhone or Android). If the camera and your phone are both connected to your home wifi, you will get real-time streaming within your home, and you can turn on privacy mode to keep the signal from traveling to the cloud for processing (i.e., it will stay in your local area network, the signal never leaves your home). This makes the stream much faster, but also makes sure that it will still work during an internet outage. When you leave your house and connect to your cellular carrier or to a different wifi, the camera's signal will travel through Amazon's cloud computing service then get bounced down to your phone's app. The cloud computing does two things. One is that it makes it possible for you to remotely connect to see your live camera wherever you are, as long as you have your phone. Second, it will analyze the sound to check for crying and send you an alert when any fussing is detected. And it seems pretty specific to crying, rather than sending alerts whenever there is a little other noise (like a door closing). It also saves little 30-second video clips from when the crying was detected, so you can go back (like with a DV-R) and see what was going on. Nice touch! And that cloud service is completely free to you, paid for by Lollipop. The digital video is streamed in high definition (720p), and we found that it has generally good video and digital audio sound quality. Even the night vision is really pretty great. One of the features we really liked, and we didn't find on any other wifi baby monitor, was the ability to stream just the audio overnight (audio mode for night nursery). So your smart phone screen can be off, and you can just use it as a basic audio-only monitor; that's a nice feature to save your phone's battery life and keep the bright screen from turning on in the middle of the night. In our testing, this worked really nicely, but it's worth noting that it only works in this mode when you are on the same wifi connection as the baby camera (i.e., you're at home). We found the video quality to be very high, though the "real-time streaming" did sometimes get a little delayed by a few seconds, especially when streaming through the cloud to our iPhone on a 4G connection. A few cool things worth mentioning. Mounting was easy, no more drilling into the crib or using adhesives. You can buy a separate sensor for about $55 that will tell you some additional information about your baby's room, like room temperature sensors, and air quality and humidity sensors; it connects to the camera via Bluetooth. You can also play sounds for your baby through the app, like white noise, trickling water, or even the sound of the vacuum. You can also setup multiple cameras to view on the same app (not at the same time though). So there are tons of great features here, and overall we thought it worked really well in our testing. Drawbacks? Well, it is a little pricey coming in around $150, just like the Cocoon Cam. It also can get pretty laggy when streaming through cellular networks, but that's not really Lollipop's fault. Note that the one currently available on Amazon as of July appears to be a knock-off Lollipop camera, in the meantime, you might need to purchase one directly through the Lollipop website. This camera deserves a much higher spot on our list, but we're worried about where you can actually get a genuine version of the monitor - we're in touch with the company and will update when we hear some news. So overall, this is a great new baby monitor with wifi that you will very likely be pleased with. We'll update this article in 6-months to talk about long-term reliability. Interested? You can check out the Lollipop Baby Monitor here.

Alex Colon is the managing editor of PCMag's consumer electronics team. He previously covered mobile technology for PCMag and Gigaom. Though he does the majority of his reading and writing on various digital displays, Alex still loves to sit down with a good, old-fashioned, paper and ink book in his free time. (Not that there's anything wrong wit... See Full Bio
Security: Whether you’re skeptical of people hacking baby monitors or deeply concerned about it (and there are stories!), the bottom line is that some monitors are at more risk than others. A Wired story from 2015 refers to security firm Rapid7’s findings that Wi-Fi–enabled monitors were particularly vulnerable. We figured people would prefer the not-hackable type, and we talked to a security expert about how to protect your privacy.

The Infant Optics’s range within our test houses was never an issue, and, as with others we tested, we had to walk outside and down the street before losing the signal. The image quality was good enough to make out facial details 6 feet away in a completely dark room (as it was on others we tested). It’s easy to add more cameras to the set (you can use up to four Infant Optics add-on cameras, which are separate purchases, usually for about $100). You can mount the camera on a wall easily, pan and tilt 270 and 120 degrees respectively, and you can set the parent unit to scan between multiple cameras to keep an eye or ear on everybody at once—another nice feature that’s not unique to this model.


Baby monitors may have a visible signal as well as repeating the sound. This is often in the form of a set of lights to indicate the noise level, allowing the device to be used when it is inappropriate or impractical for the receiver to play the sound. Other monitors have a vibrating alert on the receiver making it particularly useful for people with hearing difficulties.

The Levana Lila is the second highest ranking dedicated monitor in the review, and 5th overall. This budget-friendly option has the longest battery life of any dedicated monitor we tested and scored well enough for ease of use and sound clarity that you won't be frustrated. Unfortunately, this monitor has a shorter range than the Philips Avent SCD630 and the fewest features in the group (which makes it easier to use). So it may not be a good choice for parents that want all the bells and whistles. This monitor does sport 2-way talk to baby, sound activation, and automatic screen wake/sleep, which are some of the most important features in our mind. The Lila has no zoom, and the field of view is rather small for a camera that is not remotely operated (no pan or tilt). However, if you want a dedicated monitor for the simplicity and peace of mind with less chance of a dropped signal, and budget is a factor, then the Lila can't be beaten.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
Range: Range is the main drawback of an RF model, as audio monitors can roam farther out, and a Wi-Fi connection can theoretically be checked anywhere. We wanted an adequate range in a typical home—to be able to maintain a signal up or down a flight of stairs, across the house, and out on a patio or driveway, but we didn’t expect much beyond that. We zeroed in on monitors rated to about 700 feet of range1 or greater.
You might see monitors on the market with claims that they can track a baby's breathing or movements, but unless the unit is registered with the FDA, it's not a medical device. Consumer Reports hasn't tested this type of monitor. Talk with your pediatrician if you think your child has a condition that warrants medical monitoring. He or she can give you advice on the best devices.
Features are important, but we encourage you to consider which features you think you will realistically use and which sound like fun in theory, but probably won't happen in practice. Many of the monitors carry a higher price tag and justify the price with the addition of features parents are unlikely to use in real life. Features like alarm clocks for feeding schedules, and alerts for low humidity might feel like something you should consider, but in practice, sound activation and quality images are more useful. In fact, more features often translate to being more difficult to use, and many of the features are novelty functions that most parents stop using over time. A good example of this is the Philips Avent SCD630 with an ease of use score of 8, but a features score of only 4. Try not to fall for the propaganda of bells and whistles that you might only use for the first few weeks. In the end, what you want is a good monitor with great sound and video quality.
This is a nice new addition to our best baby monitor list, with some nice advanced features that make it quite a bit more than just a baby video monitor. Unlike the Infant Optics, this wifi baby monitor uses your own smart phone rather than an external screen. This is just like the popular wireless security cameras you can setup around the house and watch on your smartphone. So instead of walking around the house with a baby monitor screen, like from your bedroom to living room and kitchen, you can simply fire up the app and see what's going on instantly, no matter where you are. In the bathroom? No problem. Out on a date night and want to check in on what the baby sitter's up to? No problem. Just open the app on your phone (Apple or Android) and it will connect to the camera in just a couple seconds and show you a live streaming video feed (with audio) of your sleeping baby. In our testing, we thought the video quality was very good in both daylight and night vision conditions. It was the 720p high definition that helped with clarity, though the wifi video feed did become a bit choppy at points when testing on a network other than our home wifi. That's not surprising, and is just like any other live streaming video. One cool thing about the app is that we could minimize it and still have the audio playing, so you can hear everything from your baby's room while doing something completely different; in that regard, it operates a bit like a music player (iTunes, Spotify, etc). Installation of the system was pretty easy, though a bit more involved than others because of its unique features. First, you install the app on your phone and register with Cocoon Cam. Plug in your camera and use the app to scan the QR code on the back of the camera. That will get the camera and your app working together. Then, you need to mount the camera on the wall of the nursery, about 5 feet above the baby. Don't try to put it on a dresser or edge of the crib. Mount it on the wall so that it's pointing down at your sleeping baby and can see all 4 corners of the crib; we found that installing it correctly was the most important aspect for getting it to work reliably. If you don't have wifi, the camera can also be plugged into your router with an ethernet cable (they provide a short one). OK, so now that it's up and running, and assuming you've installed it per instructions, you'll be able to take advantage of its awesome features. First, the system has an awesome breathing/activity monitor that will let you watch your baby's breathing patterns. It uses infrared light to track the rise and fall of your baby's chest to monitor breathing and activity. Second, for peace of mind, it can send you little alerts when things change, like breathing has slowed or sped up. Correct baby camera placement is critical for these features, so make sure to follow instructions. The way it works is that your video feed is streamed live to the Cocoon Cam cloud where machine learning algorithms securely process the video and assess breathing, and then that information is streamed continuously to the app on your phone. It worked surprisingly well given the complexity of the data streaming and analytics. We did get some anomalous readings in our testing, but mostly when the baby camera wasn't correctly installed above the crib, so it wasn't in clear view of the baby. It also didn't work well when our baby was sleeping on her side, or when her lovies were strewn across her back in random ways. It did work impressively well as a breathing monitor, even with a swaddled baby. Third, the system allows you to download and review videos and activity data, which is a nice touch. Finally, the newest version of this baby monitor includes cry detection, which works reasonably, but we had some false alarms with other noises. So this video baby monitor provides some advanced functionality for parents interested in monitoring their baby's breathing activity and having the flexibility of using their phone as a screen. If you're just looking for a video monitor that uses a phone app, but without the breathing monitor capability, check out some of the other wireless wifi options such as the Nest Cam or Lollipop. We're not completely certain it has the accuracy of a mat-based breathing monitor, and the reliability of the breathing status indicators wasn't perfect, especially if the camera isn't perfectly installed. And no remotely controlling the camera angle (pan, tilt). So overall, this is a great baby monitor, and we're really impressed with how Cocoon Cam's newest model performs, and the feature list is really extensive. Interested? You can check out the Cocoon Cam here. 
It uses 2.4GHz FHSS technology that offers a private connection between the monitor in your baby's room and the dedicated viewer in your hand. The FHSS connection should minimize interference, and most reviewers say the audio is clear. In BabyGearLab's testing, the reviewer found that the Phillips AVENT had the best audio signal of any of the monitors it tested.
The handheld unit's 5-inch screen is the largest in our review, complementing the camera's wide-angle lens. However, its resolution is the same as smaller units, so the video quality, while acceptable, is poorer. Also, you can't move the camera remotely, a feature you may not use if you only watch your baby as they sleep. The Wide View 2.0 makes up for its video quality with a user-friendly design. It only takes a few minutes to set up and a couple hours to charge the handheld unit. The handheld unit lets you adjust the volume and has an uncomplicated menu. This simplicity comes at the cost of common features – the Wide View 2.0 doesn't track room temperature, and it can't play lullabies through the camera unit. Because this is a simple video monitor, the battery lasted nine hours before it needed to recharge during our tests. The overall best baby monitor, the Infant Optics DXR-8, went 10 hours before shutting off, so this is a very good result. The Summer Infant Wide View 2.0's handheld unit has a limited indoor range compared to most other baby cameras – it’s good enough for most homes but insufficient in particularly large ones. Summer Infant offers a one-year warranty, which is average for video baby monitors.
Today’s best baby monitors are not your mama’s baby monitors! High-definition video monitoring is becoming the norm, and many baby monitors are now app-enabled or have wi-fi capabilities. Even basic audio monitors have stepped up their game, with many implementing DECT (Digital Enhanced Cordless Telecommunications) technology to eliminate the interference and the lack of security that comes from monitors using the 2.4 GHz frequency band. If you’ve ever heard your neighbors chatting through your baby monitor, you’ll appreciate this change! DECT also prevents super-creepy baby monitor hackers from spying on baby—or you!
Using the speaker, you can tell the Project Nursery camera to pan and tilt, play a lullaby, check the temperature in the nursery and more. You can do all this from any room that has an Alexa-powered speaker, so that you don't need to enter the nursery and risk waking up your sleeping baby. If you already own an Echo speaker, Project Nursery sells the Alexa-enabled camera on its own.
Shopping links are provided by eBay Commerce Network and Amazon, which makes it easy to find the right product from a variety of online retailers. Clicking any of the links will take you to the retailer's website to shop for this product. Please note that Consumer Reports collects fees from both eBay Commerce Network and Amazon for referring users. We use 100% of these fees to fund our testing programs.
Sound devices relay what is happening in baby's room via sound only. A great sound option is quiet unless the baby is making noise so that you won't be disturbed by white noise or constant static. This basic monitoring type can be all you need if your goal is being alerted when your baby is crying and needs your assistance. This style can be elementary with sound only like the V-Tech DM111 or it can have bells and whistles like a nightlight, 2-way talk, lullabies, and mic sensitivity adjustment features like the Philips Avent DECT SCD570/10. Most parents can get by with a sound only device as it provides the information you need to determine if your baby needs you or not.
If you struggle with technology and don't need or want to see your baby from any other location besides your home, you might want to stick with the dedicated monitors that require little setup and have fairly intuitive user interfaces. This isn't to say that most people can't sort out the Wi-Fi monitors, but it is undeniably less work to just plug the camera into an outlet and go than it is to sign up and download software applications.
While the price is too high compared with our other picks to merit a recommendation, the Arlo Baby by Netgear Smart HD Baby Monitor and Camera does have some appeal, mostly because it overcomes some of the traditional shortcomings of Wi-Fi monitors and security cameras used for that purpose. Its main advantage is that its app can continue to play audio even if the app is not open in the foreground of your mobile device. This means it can continue to broadcast sounds from a baby’s room while parents sleep elsewhere, alerting them if there’s trouble (as a traditional monitor would), without the hassle of loading the live stream every time. It also offers some unique features: The camera itself can work wirelessly off a rechargeable battery (which no other monitor we’ve tested can do), and it can track and chart several days’ worth of temperature and other environmental data in a child’s room. These features alone don’t justify its added cost—the current price is about $100 more than that of either our pick or the least-bad Wi-Fi monitor we’ve tested—but that cost may be easier to swallow if you’re already using other Arlo devices, which we began recommending as a runner-up in our piece on indoor security cameras in fall 2016. As with most Wi-Fi monitors, owner reviews note problems with the signal dropping out, sluggish response time when opening the video on an app, and other irritations, such as problems seeing the feed on multiple devices.
Range of signal: Some baby monitors have better range than others. If you live in a big house with multiple rooms, range will be a key consideration for you. Anyone who lives in a single-story house or a smaller apartment may not need as much range. Many baby monitors have an alert when you get out of range, and the packaging typically gives you an estimate of the range. Bear in mind that range varies widely from home to home. The construction of the walls between you and the baby monitor may even limit the range.
Wireless encryption: This ensures that no one else can tap into your monitor’s “feed” and see what’s going on in your house. WiFi-enabled monitors are great for portability and range, but may be more susceptible to hacking. If you go this route, be sure to secure your home wireless network and keep the monitor’s firmware updated. Otherwise look for digital monitors with a 2.4 GHz FHSS wireless transmission.
×