iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 
For these reasons, the Evoz Vision tops our list as best travel baby monitor. The Wi-fi enabled monitor allows more than one person to check in on baby—a nice feature when you're traveling to visit family and friends. Just grant grandparents or sitters access to the app. Another great travel feature: It has an unlimited range. Plus, it uses cry detection algorithms to distinguish baby cries from other noises and will alert you via text or email when baby cries, based on your preference settings. Just make sure you'll have Wi-fi at your destination.

We don’t think most people would be happiest with a Wi-Fi–enabled baby monitor. The benefits—primarily, being able to view the camera footage remotely, on multiple phones, without keeping track of a separate monitor—do not make up for the disadvantages Wi-Fi monitors have as a category. Security is probably the first thing on most people’s minds. The likelihood of someone hacking into your baby monitor is remote, but it’s possible, said Mark Stanislav, director of application security at Duo Security, in an interview with The Wirecutter. You’re relying on the security of your own home network and also the ability of the manufacturer to secure all its devices. “Once you get into an Internet-connected device, and it really depends on what kind of device it is, but these devices very often bypass your home’s router and firewall. Basically, once you’re connected to this device, you are inside the home’s network. So, it’s possible to use these devices to access other devices in a home,” Stanislav said. (Stanislav was also involved in Rapid7’s research into the vulnerabilities of Wi-Fi–enabled monitors.)

The audio is quite good as well, with very little distortion. As with other Wi-Fi video baby monitors, there is lag as the video stream travels through distant servers before reaching your smartphone. In our tests, the SCD860 had good results one moment and issues shortly after. This is one of the reasons we gave it a low score for connection quality. A few of our testers had trouble setting up this baby camera using the smartphone app. The camera doesn't work without a wireless connection, unlike traditional video baby monitors that use a handheld receiver. The app is easy to use, and it lets you set up push notifications and adjust the sound sensitivity. We had a few connection issues independent of our Wi-Fi connection, which could cause concern. For a time, we had no connection, so we didn't know what was going on in the other room. This monitor lets you track the temperature and humidity in your baby's room and has a nightlight with multiple light color options. If your baby is upset, you can use the app to talk to them or play one of the 10 lullabies through the camera's speaker. The Philips Avent Smart baby monitor SCD860 has a two-year warranty, which is the longest of all the models we tested.


Baby video monitors with all the latest bells and whistles cost around $200, sometimes more depending on the feature set. However, you can find solid baby monitors for $100 to $150 less than that, though you'll sacrifice on video resolution and some features. Cloud storage can add to the cost of a baby monitor in the form of an ongoing subscription, though that feature is usually optional.
The DXR-8 uses a secure 2.4 GHz FHSS wireless transmission to ensure privacy, gets up to 10 hours of battery life on a single charge, and can switch to audio-only mode with the camera off to save juice. That said, it has gotten panned for a quickly declining battery life (as well as poor range). Still, that hasn’t stopped 24,000 reviewers from giving it an overall 5-star rating on Amazon. In terms of bells and whistles, it features everything parents have come to expect in a monitor: invisible infrared night vision, (no annoying blue light to wake the baby) two-way intercom, room-temperature sensor, and the ability to work with up to four other cameras.
The price of the Infant Optics, at about $150, is on the higher end for baby monitors. As much as we wanted to recommend a more affordable option, we found their shortcomings to be major enough—terrible video quality and poor connections were common—that we couldn’t recommend one. The Infant Optics offers a better value even though it’s among the more expensive options out there. Many people use these daily for years, which helps justify the investment, and the reports of reliable customer service from other customers are reassuring. If you have to spend less, go audio-only.
One minor but potentially annoying flaw: The “on” lights on the parent unit are a touch bright, and you may be more sensitive to them since you’re likely to have the unit within view as you sleep. They appear as greenish yellow light from the face of the unit, and a charging light, which is blue when it’s fully charged. Depending on how sensitive you are to light, you may want to lay the display face down on a nightstand or cover the status lights with tape.
Netgear brought the best features of its Arlo line of home security cameras to its first baby monitor. That includes Full HD video, night vision, sound and motion detection, two-way audio, 24/7 recording, and free cloud storage. Netgear also used feedback from Arlo owners to add a nursery-centric spin to the Arlo Baby, with a multicolored LED nightlight, a built-in music player with nine lullabies, environmental sensors, and artificial intelligence that can recognize your child’s cries.

Finding the right monitoring device for your family can be challenging given the number of options and the varieties of devices on the market. However, there is a good choice for every family on this list. Once you determine your needs and wants, the field is relatively easy to narrow. You can't go wrong with any of the winners on this list, but if you need more information or details, be sure to check out our more detailed reviews on each monitoring product type Sound Monitor, Video Monitor, and Movement Monitor.
This type of monitoring device attaches to your baby via their diaper, clothing or as a sock depending on the model. Most of the wearable options alert in the room and only a handful send a message to a parent device (smartphone or similar). In our experience, many of these have high false alarms from moving and crawling babies or high Electromagnetic Field (EMF) Levels (which we try to avoid). The Snuzo Hero SE is a cost-effective wearable with a unique vibration feature and very low levels of EMF.
Just because you’re pulling double diaper duty doesn’t mean you need to buy two baby monitors. If you’re a twin mom, simply look for a monitor that can accommodate add-on cameras. The Babysense Video Monitor comes with two digital cameras right out of the box (and can handle up to four), making this the best baby monitor for twins. With the push of a button, you can toggle between views of your twin babes. Plus, this monitor features digital pan/tilt and zoom, two-way communication, room temperature monitoring and a 900-foot range.

Many of the baby monitors we've tested are internet-connected, letting you watch infant with your phone or tablet through an app just as if you were checking a home security camera. Because of this, you might not actually get a standalone display to go along with the camera. They aren't out of the question, however; some camera-only baby monitors offer viewers as an add-on or in a bundle. And if there aren't any available, you can simply get an inexpensive tablet like the Amazon Fire to use as a dedicated viewer.


There are two basic types: audio and video/audio. Some are analog, others are digital. All monitors operate within a selected radio frequency band to send sound from a baby's room to a receiver in another room. Each monitor consists of a transmitter (the child/nursery unit) and one or more receivers. Prices range from about $25 to $150 for audio monitors and about $80 to $300 for audio/video monitors.

What baby video monitors are the best? After researching over 50 video monitors, we purchased the top 9 video options and put them through a series of rigorous tests to compare the range, sound clarity, video quality, ease-of-use, and more. Our testing process and hands-on side-by-side analysis are designed to sort through and determine which baby monitors will meet your families needs and budget. Our detailed information will help you decide if you want a Wi-Fi capable unit or a dedicated monitor and which features are necessary for your needs. Continue reading and let us help you find the best monitor for your baby.

The more old fashioned video monitors are better if your internet isn't reliable because they use a dedicated video monitor instead. You can also choose to pair high-tech Wi-Fi security cameras with cheaper audio-only baby monitors to have the best of both worlds. We've tested a few baby monitors and researched the rest to find the best ones you can buy no matter your preference.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
This monitor comes with a 2.4" color screen that connects to its camera over a secure, interference-free connection, providing you with video up to 900 feet away. It boasts a two-way talk system and night vision, as well as several extra features like temperature monitoring, voice-activation mode, 2x zoom and more. The manufacturer doesn’t specify how long the battery on this video baby monitor lasts, but reviewers say you can get around six hours of continuous use from it.

One of the primary uses of baby monitors is to allow attendants to hear when an infant wakes, while out of immediate hearing distance of the infant. Although commonly used, there is no evidence that these monitors prevent SIDS, and many doctors believe they provide a false sense of security.[1] Infants and young children can often be heard over a baby monitor in crib talk, in which they talk to themselves. This is a normal part of practising their language skills.
However, the Baby Delight’s biggest flaw is one of technicality: Its button sensor is just large enough to avoid being labeled as a choking hazard, but it doesn’t leave a lot of room for error. In fact, the button does become a choking risk after your child is 3 years old, and the new parents we spoke to felt uneasy about using it after 12 months just to be safe. Still, if you’re only interested in monitoring movements for the first few months, the Baby Delight is a more user-friendly alternative to the Angelcare.
Most monitor systems have an electrical cord or nonrechargeable battery option for the unit in the baby's room. And receivers typically have an electrical cord or rechargeable batteries. Some models are notorious for burning through batteries at an alarming rate. Parents have complained that even monitors sold with rechargeable batteries built in can drain quickly. Our Baby Monitor Ratings , available to subscribers, include an evaluation of battery life. Subscribers can also check out our battery report and Ratings (for subscribers).

Aside from the thousands of Amazon reviews, Reviewed.com likes it, noting that it “has physical buttons on the parent unit that are more responsive than Samsung’s [SEW3043 BrightView HD, our former runner-up] touchscreen controls.” PCMag’s Rob Pegoraro gave the DXR-8 a “Good” rating, and in his review, cites the battery life as being one of the best features. “What is remarkable is how long the display unit’s 1,200mAh battery ran on a charge,” Pegoraro says. “Infant Optics touts 10 hours of runtime with the screen off, but even with periodic peeks I didn’t get a low-battery warning until 12 hours later.”
Like most other product review sites, ConsumerSearch is supported by a combination of commissions on the sale of the products we recommend and ads that are placed on our site by Google. If you find something you like, you can help support us by clicking through and buying the products we pick. Our editorial process is independent and unbiased; we don’t accept product samples, requests for reviews or product mentions, or direct advertising.
The video and audio quality of the Keera are among the best in our comparison, allowing you to see and hear events clearly. We also like that you can remotely reposition the camera if your child moves out of sight. Despite its strengths, the Levana Keera couldn't surpass Infant Optics and Philips Avent in our rankings due to some noticeable flaws. For example, we experienced a few dropped connections and degraded video quality at a distance during our tests. It also had the shortest battery life of the video baby monitors we tested. Lastly, we had trouble controlling the device due to an odd mix of physical buttons and a touch panel.
A baby monitor's job is to transmit recognizable sound and, in the case of video models, images. The challenge is to find a monitor that works with minimal interference—static, buzzing, or irritating noise—from other nearby electronic products and transmitters, including older cordless phones that might use the same frequency bands as your monitor.
General Usability: This one is two-fold. First we wanted to make sure each monitor could perform under bright, dim, and no light; and pick up even the faintest sounds. Then we looked at how easy it was to use the monitor. Could we adjust the screen brightness, or were we going to be half-blinded when we picked it up at 1AM? Was the monitor voice-activated, or does it pick up white noise in the background? How sensitive were the alarms, and did they sound like a baby-waking screech or a soft ping?

The Dropcam Echo is an example of a digital video camera system that uses your existing wireless network, allowing you to use your computer or other device as the receiver. (We haven't tested this type of monitor.) Parents go to the Dropcam website, sign in to their account, and then connect the Dropcam to their router using an Ethernet cable. (Once the connection is made, you don't need to use the cable again.) The Dropcam locates your wireless network, you enter your unit's serial number, and the unit begins streaming encrypted video that you can view on a computer, iPhone, iPad, or Android device. You mount the camera in your baby's room and plug it into an electrical outlet.
Beyond security, Wi-Fi monitors have other disadvantages. In our tests, connectivity was more of an issue with Wi-Fi monitors than it was with RF monitors. We tested our Wi-Fi monitors on two separate routers and consistently had problems—we’d often lose the connection some time in the night and not even realize that the monitor had disconnected until morning. This happened with all three Wi-Fi models we tested. We never really felt confident relying on any of the connected monitors overnight, despite the fact that the modem and router were literally on the other side of a wall from the monitor. Other owners (like this one) have had the same issues.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
What baby video monitors are the best? After researching over 50 video monitors, we purchased the top 9 video options and put them through a series of rigorous tests to compare the range, sound clarity, video quality, ease-of-use, and more. Our testing process and hands-on side-by-side analysis are designed to sort through and determine which baby monitors will meet your families needs and budget. Our detailed information will help you decide if you want a Wi-Fi capable unit or a dedicated monitor and which features are necessary for your needs. Continue reading and let us help you find the best monitor for your baby.
Just because you’re pulling double diaper duty doesn’t mean you need to buy two baby monitors. If you’re a twin mom, simply look for a monitor that can accommodate add-on cameras. The Babysense Video Monitor comes with two digital cameras right out of the box (and can handle up to four), making this the best baby monitor for twins. With the push of a button, you can toggle between views of your twin babes. Plus, this monitor features digital pan/tilt and zoom, two-way communication, room temperature monitoring and a 900-foot range.
The LeFun is an inexpensive Wi-Fi camera that makes internet watching affordable for almost every family. This useful camera works with your personal device and is the only option here that features true pan and scan features to move the camera around the room remotely. The image quality is also impressive given the lower price and simple design. This camera is a good choice if your house is bigger or you'll be spanning more than 3-5 walls between rooms where range could become an issue.
For roughly a third of the price of our pick, the VTech is far more affordable. Losing video is a major sacrifice, of course, and we’re certain most parents looking for a first monitor will prefer being able to do a visual check-in on a baby. Budget advantages aside, we could see this being best for parents of toddlers who are considering replacing a failing monitor, and who know they will likely use a monitor only at night as a way to hear a kid crying out from a distant bedroom. Many reviewers have also found it useful as a way for adults to communicate, especially for caretakers who need to be able to hear when adults with mobility or medical issues need help in another room.
Your phone might not have great battery life. Many parents who use a wifi baby monitor come to the realization that their smart phone battery life isn't so great when they are streaming a live video and audio feed from their baby monitor. If you have a newer iPhone or Android device, it will probably do pretty well, but if you have an older phone the batter is probably a bit weaker already and you will notice your battery life dropping pretty quickly during use. So definitely consider battery life and charging options for your smart phone when you are choosing between a self-contained versus wifi baby monitor. 
The Nest Cam Indoor Wi-Fi and the LeFun C2 720P Wi-Fi came in a close second to the iBaby M6S Wi-Fi for features, both scoring an 8 of 10. Because these cameras are designed more with surveillance in mind and are not solely marketed for baby, they have several features that make parents lives easier, but not anything fancy and fun for baby. They do offer 2-way communication, but no lullabies or environmental sensors. Given that many parents already have "noise makers" (aka lullabies) covered by way of another product, the lack of this feature isn't a deal breaker in our book. So while these Wi-Fi cameras lacked the gadgetry fun of humidity sensing and the other bells of the iBaby M6S Wi-Fi, they still got the job of monitoring done in a way that is easy for parents to use. The bonus of the Nest Cam Indoor Wi-Fi camera is that it can be used for multiple applications when baby gets older and no longer needs an overnight monitor. This monitor can easily shift for use as a nanny cam, security, or pet camera. We think this takes the sting (if there is some) out of its lack of baby fun features, which in the end, most parents usually stop using when the novelty wears off.
When shopping for a video monitor, note that you'll pay a substantial premium over audio-only monitors, which cost around $30 to $50. You'll need to decide if the extra money for video viewing is worth it, though parents may appreciate the ability to glance at a smartphone app or handheld monitor to visually check in on their sleeping child instead of opening a door and potentially waking up their baby.

The Nest boasts some impressive hardware specs, such as true 1080p/30fps video and a 3-megapixel camera sensor. Setting up the Nest Cam specifically to look in on a 2-year-old at night, we found the video quality on Nest's camera to be sharper and more detailed than on any baby video monitor we tested. The Nest Cam includes push-to-talk features as well as alerts triggered by motion or sounds. And when your child is past the age when you need a nighttime monitor, you can repurpose the Nest Cam to check in on other parts of your home.
The iBaby shares several advantages over RF monitors that are common to Wi-Fi models as a category. It can be accessed from your phone anywhere. Multiple phones can connect to it. You access it via an app and don’t need to worry about finding, charging, and keeping track of a separate dedicated monitor. Some other “advantages” are add-ons we don’t consider necessary. You can record the camera’s footage, for example, or read parenting tips within the apps, or receive notifications or alerts when the monitor detects motion or sound. You can get air-quality alerts (we did not test them for accuracy). In other ways—pan/tilt, night vision, image quality—the iBaby is similar to RF video monitors like our pick.

Image and audio quality: We wanted a high enough resolution to make out facial features in the dark, at more than a few feet of distance, and (obviously) in daylight as well. The screen itself did not need to be incredibly high-resolution, but we wanted a size that would be easily visible on a nightstand. For all monitors, but especially audio-only options, we wanted to be able to hear everything clearly at the lowest volumes.


Using the speaker, you can tell the Project Nursery camera to pan and tilt, play a lullaby, check the temperature in the nursery and more. You can do all this from any room that has an Alexa-powered speaker, so that you don't need to enter the nursery and risk waking up your sleeping baby. If you already own an Echo speaker, Project Nursery sells the Alexa-enabled camera on its own.
"Quick and easy set-up is Nest Cam's secret sauce -- they promise a 60 second set-up and that's pretty much what we found in our testing," Baby Bargains says. Still, "Nest Cam isn't a perfect solution as a baby monitor." In addition to the signal dropouts, Nest Cam's audio cuts out anytime your phone's screen goes to sleep. It also drains the battery, Baby Bargains says, so you'll have to leave your device plugged in all night. The camera is fixed – it won't swivel – and the audio can lag behind by 3 to 5 seconds, depending on your router's speed.
The BabySense (and other mattress sensors) require a hard surface under the mattress to work, and they don't work with all mattress types so you'll need to research your mattress to ensure it is compatible. This option is also not good for travel because of these special considerations. This product doesn't have a parent unit which means the alarm happens in the nursery with your little one and could be traumatic to sleeping little ones. If you want a movement device that works well and has a longer life than the wearable options, then the BabySense 7 is a great way to get the job done with minimal fuss.
Bottom Line	Fun Wi-Fi option with lots of features that is easy to use and has true to life images we love	Really cool camera with lots of uses and great video for simple baby monitoring	Budget friendly Wi-Fi camera with nice images, but potential delay of varying length	Our favorite dedicated monitor with impressive range that is very easy to use	A budget friendly dedicated monitor that gets the job done well without all the fluff

Monitor options: We wanted easy, intuitive, responsive controls, whether they were on a touchscreen or using physical buttons. We also wanted the monitor to withstand being knocked off a nightstand or messed with by a toddler, and generally be tough enough for the rigors of life in a home with young children. We didn’t really care whether or not we could set an alarm, use it as a nightlight, or play chintzy music through the camera—but seeing a temperature in the kids’ room was a detail we appreciated.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
×