Bargain hunters may prefer the iBaby M6T. Though it's a couple years old and records video in in 720p resolution, it's still a capable monitor with night vision, two-way audio and helpful pan-and-tilt capabilities. It's also available for nearly $100 less than the Arlo Baby. If the voice-powered Alexa assistant is a part of your family, consider the Project Nursery Smart Baby Monitor, which includes a smart speaker in its $229 bundle that lets you remote control the camera.

iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 

The best monitor for sound in our tests is the Philips Avent SCD630, with a score of 8 of 10. This monitor has the best sound activation and background cancellation features in the group, and while the sound is bright, it is also clear without an echo. Most of the competition earned 4s and 5s for sound, with all of the Wi-Fi monitors only earning 4s. It seems that no matter how good your parent device might be, the Wi-Fi cameras struggle for the most part to transmit clear sound with good sound features.
But, for many parents, a baby monitor is a part of daily life. If you need to visually confirm that your baby is safely asleep for the night in order to leave the room and relax, it can feel like a necessity. A baby monitor gives you a camera and/or microphone near the crib, and a separate rechargeable parent unit (aka, a monitor) that connects wirelessly and can travel with you throughout the house, either working while plugged in or running off its battery. Monitors are most commonly used for new babies, but even once your household is past the infant stage you may appreciate an easy way to check to make sure your kid is still asleep, still breathing, or still in the room at all. It’s nice to see your children in bed, dreaming happily, sleeping in adorable new positions, cuddling with animals, and generally doing okay. A baby monitor can make that happen.
Gone are the days of silently peeking into the nursery to check on your napping baby and then, whoops, accidentally waking them up (“No, no, please no!”). A baby monitor uses a camera to watch over the crib, while you carry a handheld device that lets you know what’s going on with your child at any given moment, no matter where you are in your home. There are also other monitors that track sleep or breathing either with a clip or sock.
×