With more than 24,000 Amazon reviewers giving this monitor a near five-star rating, we’re proud to include the Infant Optics DXR-8 video baby monitor on our list of best baby monitors. Parents rave about its crystal-clear picture in both light and darkness, and the interchangeable wide-angle lens for larger viewing areas (sold separately). Not only that, the DXR-8 has the ability to pan and zoom across baby’s room without parents having to enter the room and move or adjust the camera. We think these features make the Infant Optics DXR-8 the best video baby monitor.

We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.


Winner of this year’s JPMA innovation award for safety, the Nanit Smart Baby Monitor is an over-the-crib Wi-Fi video monitor that uses computer vision technology to track a baby’s sleep habits/patterns and provide data-crazed parents with stats and customized sleep tips in the morning, most of which are written by medical professionals. The only catch is that to receive these reports and tips, you need to pay $100 a year for Nanit Insights, the company’s subscription-based service. For parents who’d rather not pay the monthly fee, Nanit is still a sleek HD video monitor with night vision, one-way audio, and a soft glow LED nightlight.
At over $200, are advanced audio/video monitoring systems with multiple cameras and receivers with large screens, as well as the ability to connect to several mobile devices. While they are loaded with features, it’s important to look closely at the audio and video quality. Expensive monitors are just as susceptible to interference as inexpensive ones.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 

As with any internet-connected device that watches or listens to your home, it's not out of the ordinary to be somewhat wary of a smart baby monitor. All Internet of Things (IoT) devices are potential soft spots for hackers to monitor you. Anything you network can possibly be compromised, and while you shouldn't be afraid of an epidemic of camera breaches, you should always weigh the convenience of these devices against the risk of someone getting control of the feed.
The Nanit couldn’t be more perfect for analytical types. The camera—when placed just so—uses computer vision to watch your baby’s every move, and then tell you what it means. You get a notice on your phone, which acts like a handheld monitor, when your child is awake, acting fussy or has fallen asleep. The Nanit also assigns a sleep score to each night based on how many hours your child was actually crashed out. Other stats include how many times you went into your child’s room and how long it took for your little one to fall asleep. Because the Nanit streams live video and audio to your phone, you can also check in on your kiddo when you’re away from home. It also has a nightlight and temperature and humidity sensors.
Baby monitors may have a visible signal as well as repeating the sound. This is often in the form of a set of lights to indicate the noise level, allowing the device to be used when it is inappropriate or impractical for the receiver to play the sound. Other monitors have a vibrating alert on the receiver making it particularly useful for people with hearing difficulties.
It really depends on what you feel most comfortable with. There are audio monitors that allow you to listen to any noise coming from the nursery, vital monitors that track sleep and breathing and video monitors that add sight to sound. Babylist parents overwhelmingly choose video monitors. The security of seeing what your child is up to—like if they’ve gotten tangled in their swaddle, pulled their diaper off or climbed out of the crib—can be worth the extra cost of a video monitor.
×