There are a few things you can demand from a decent HD video baby monitor, like a crystal clear image and good night vision capabilities. And there are things you can expect of a good Wi-Fi-enabled monitor, like easy remote access from a smart device with real-time streaming audio and video. Then there are things you might hope for from a baby monitor, like two-way talk and solid battery life.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
Environmental sensors: Many monitors include the ability to set thresholds and upper limits for room temperature and/or humidity, and they'll alert you when these ranges are exceeded. While they can't control the temperature or the amount of moisture in the room's air, this feature can help you improve your child’s comfort, which will help them get more restful sleep.
Using the speaker, you can tell the Project Nursery camera to pan and tilt, play a lullaby, check the temperature in the nursery and more. You can do all this from any room that has an Alexa-powered speaker, so that you don't need to enter the nursery and risk waking up your sleeping baby. If you already own an Echo speaker, Project Nursery sells the Alexa-enabled camera on its own.
Baby monitors, despite the name, are meant more for the caregiver than they are for the baby. We asked parents about which features they felt were helpful, like a long range so they could wander carefree all over the house, and reliability so they weren’t struggling to maintain a signal. Other features like being able to play lullabies, or receive temperature alerts are only as useful as you make them. And a few features, like motion monitors, can be exceptionally comforting for some, and distressing for others.
A word of caution about extremely cheap baby video monitors (we're talking devices that cost less than $50): they're not known for their security and can be hacked. Be sure to always change the default password of any connected device you purchase. You can also protect yourself by sticking to known vendors who post frequent firmware updates and have easy-to-reach customer support.
From a pure imaging standpoint, night vision is vital for watching your baby sleep from another room, and is standard for most baby monitors. Motorized pan and tilt (which lets you swivel the camera from afar) isn't quite as common, but is very welcome if you have a toddler and want to scan an entire room. High-definition is a nice plus, but you don't need the highest-resolution sensor to keep tabs on your baby—most of the monitors we test use 720p cameras rather than 1080p.
Beyond that, we wanted to hear from an expert on the products’ (perceived and real) security risks. So we spoke to Mark Stanislav, the director of application security for Duo Security and the author of Hacking IoT: A Case Study on Baby Monitor Exposures and Vulnerabilities, whose research has been featured in The Wall Street Journal, The Associated Press, CNET, Good Morning America, and Forbes.
We took these criteria into consideration, factored in user feedback and reviews from across the Web, and eventually narrowed the list to eight cameras for testing. We used each camera for several months, taking notes on the interface and any difficulties we ran into. We connected each model to multiple routers, and used each from various distances and through walls to test range. We also ran each monitor from a full charge down to zero to check battery life. Finally, we evaluated each monitor's night vision in dark environments. Read more about our tests in our full guide to baby monitors.
Netgear brought the best features of its Arlo line of home security cameras to its first baby monitor. That includes Full HD video, night vision, sound and motion detection, two-way audio, 24/7 recording, and free cloud storage. Netgear also used feedback from Arlo owners to add a nursery-centric spin to the Arlo Baby, with a multicolored LED nightlight, a built-in music player with nine lullabies, environmental sensors, and artificial intelligence that can recognize your child’s cries.
The Nanit couldn’t be more perfect for analytical types. The camera—when placed just so—uses computer vision to watch your baby’s every move, and then tell you what it means. You get a notice on your phone, which acts like a handheld monitor, when your child is awake, acting fussy or has fallen asleep. The Nanit also assigns a sleep score to each night based on how many hours your child was actually crashed out. Other stats include how many times you went into your child’s room and how long it took for your little one to fall asleep. Because the Nanit streams live video and audio to your phone, you can also check in on your kiddo when you’re away from home. It also has a nightlight and temperature and humidity sensors.