Security: Whether you’re skeptical of people hacking baby monitors or deeply concerned about it (and there are stories!), the bottom line is that some monitors are at more risk than others. A Wired story from 2015 refers to security firm Rapid7’s findings that Wi-Fi–enabled monitors were particularly vulnerable. We figured people would prefer the not-hackable type, and we talked to a security expert about how to protect your privacy.
To test connectivity, we put the handheld unit and the camera in neighboring rooms with 30 feet between them. We looked for lag, choppiness, and changes in the video or sound quality. While we rated it separately, we also did tests to estimate each baby cam’s maximum indoor range. Each camera we tested has a range of 100 feet or more, which is enough for an average-size home.
If you’re absolutely sure you want a Wi-Fi–enabled baby monitor, we found the iBaby M6S to be the best option of the three we tested (the others were the Arlo Baby by Netgear and the Evoz Glow Baby Monitor). The iBaby offers the benefits common to most Wi-Fi monitors and is slightly easier to set up than its competitors. But like its competitors, it shares the significant drawbacks, noted above, that we believe make RF monitors a better choice overall.
While the price is too high compared with our other picks to merit a recommendation, the Arlo Baby by Netgear Smart HD Baby Monitor and Camera does have some appeal, mostly because it overcomes some of the traditional shortcomings of Wi-Fi monitors and security cameras used for that purpose. Its main advantage is that its app can continue to play audio even if the app is not open in the foreground of your mobile device. This means it can continue to broadcast sounds from a baby’s room while parents sleep elsewhere, alerting them if there’s trouble (as a traditional monitor would), without the hassle of loading the live stream every time. It also offers some unique features: The camera itself can work wirelessly off a rechargeable battery (which no other monitor we’ve tested can do), and it can track and chart several days’ worth of temperature and other environmental data in a child’s room. These features alone don’t justify its added cost—the current price is about $100 more than that of either our pick or the least-bad Wi-Fi monitor we’ve tested—but that cost may be easier to swallow if you’re already using other Arlo devices, which we began recommending as a runner-up in our piece on indoor security cameras in fall 2016. As with most Wi-Fi monitors, owner reviews note problems with the signal dropping out, sluggish response time when opening the video on an app, and other irritations, such as problems seeing the feed on multiple devices.
If you want remote access to see footage inside your home while you’re away, why not just use an indoor security camera? If that’s your sole objective, we think such cameras are a better choice than a dedicated baby monitor—and we explain which ones we like and why, in detail, in our guide to wireless indoor home security cameras. But in comparing our picks here against the Nest Camera (a popular, mainstream option, and a pick in our security camera guide), we found that security cameras start to lose their appeal when you try to use them in the ways most people regularly want to use baby monitors—at home, at night, all night, while a kid sleeps. Many won’t stream audio in the background, which means that to continuously monitor your baby, the app has to be open at all times. Some can take several seconds to pull up a live feed—not ideal when you want to see why a baby is crying. They can work well if you’re traveling and want to see what the family is up to, or if you’re out for the night and want to check on the kids without bugging the sitter—but as useful as that capability is, we concluded that it really is a different task from what most people want to accomplish with a day-to-day monitor.
Our favorite standard video monitor, HelloBaby, masters the basic features. It’s the easiest to set up and its video and sound quality competes with monitors twice the price. Its screen is smaller than most, but its simple interface gives you immediate access to the most important functions: talk-back, zoom, and pan; while menu button opens up customizable settings for temperature, sound, lullabies, and timers.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.
There are two basic types: audio and video/audio. Some are analog, others are digital. All monitors operate within a selected radio frequency band to send sound from a baby's room to a receiver in another room. Each monitor consists of a transmitter (the child/nursery unit) and one or more receivers. Prices range from about $25 to $150 for audio monitors and about $80 to $300 for audio/video monitors.
Start by deciding whether you want an audio-only monitor or one that lets you see as well as hear your baby. Some parents are reassured by hearing and seeing every whimper and movement. Others find such close surveillance to be nerve-racking. Having a monitor should make life easier, not create a constant source of worry. You might find that you don't really need a monitor at all, especially if your home is small.
Beyond that, we wanted to hear from an expert on the products’ (perceived and real) security risks. So we spoke to Mark Stanislav, the director of application security for Duo Security and the author of Hacking IoT: A Case Study on Baby Monitor Exposures and Vulnerabilities, whose research has been featured in The Wall Street Journal, The Associated Press, CNET, Good Morning America, and Forbes.
Every parent we spoke to agreed. A video monitor is the way to go. It’s the difference between getting up to check on your baby because you thought you heard a noise or glancing at a screen to see if you really need to get out of bed. Video monitors are useful well into the toddler years, too. That screen can help you decide whether you need to step in and comfort your child, or if you can wait out a tantrum.
Sound devices relay what is happening in baby's room via sound only. A great sound option is quiet unless the baby is making noise so that you won't be disturbed by white noise or constant static. This basic monitoring type can be all you need if your goal is being alerted when your baby is crying and needs your assistance. This style can be elementary with sound only like the V-Tech DM111 or it can have bells and whistles like a nightlight, 2-way talk, lullabies, and mic sensitivity adjustment features like the Philips Avent DECT SCD570/10. Most parents can get by with a sound only device as it provides the information you need to determine if your baby needs you or not.
After testing more than half-a-dozen mounted cameras that beam live video from a nursery, the best baby monitor we've tested is Netgear's Arlo Baby. Netgear's baby monitor packs in a number of must-have features such as clear 1080p video, two-way audio and a host of sensors. Everything's easily accessible from a well-organized mobile app that puts the Arlo Baby's controls at your fingertips.
Among the negative reviews, the most consistent complaint has to do with connectivity issues—either difficulty linking up initially or randomly dropping the connection while in use. These represent a slim minority among mostly positive reviews, and we did not have similar issues during our test. One consequence of losing the connection (whether it’s by a dropped link or via manually unplugging the camera) is that disconnecting causes the parent unit to emit a sharp, loud, repetitive beep. It is annoying—especially so if it happens in the middle of the night—but you should rarely hear it under normal circumstances.
Both Baldwin and Kay recommend iBaby’s M6S Wi-Fi video monitor for its design and ease of use. Resembling a little robot, the iBaby offers 360-degree views and 110-degree tilt, 1080p video with night vision, and even comes equipped with lullabies. Other features include temperature, humidity, and air-quality sensors, which Baldwin admits are bells and whistles, but could be useful depending on what kind of parent you are. And, of course, everything comes straight through to your smartphone or tablet, which can also remotely control settings. And while some parents may be concerned about potential hacking of Wi-Fi monitors, Baldwin found that the risk is fairly low and usually occurred in cheap, off-brand models.
Once you've settled on a type and have considered your range, you can look at the potential choice and which features they have. The more budget-friendly choices usually lack bells and whistles but are still functional. If you want more features like nightlights, lullabies, and talk to the baby, then you may pay more and the unit could be more difficult to use. The one feature we think is important is sound activation to help keep your device quiet when your baby is quiet, thereby increasing your chances of a full night's sleep.
Most people don't have unlimited data plans for their smart phone, and are surprised to see very high data usage after just a few hours of streaming their wifi baby monitor. With HD video, you can go through a couple gigabytes of data in just a few hours, so keep that in mind. If your phone is connected to wifi that won't matter, but if you're using 3G or 4G LTE cellular service, you will definitely have slow video and tons of data usage.
Unfortunately, The DECT SCD570/10 is one of the most expensive sound devices we tested with a price that rivals some of the video options. This higher price means that parents looking in this price range may want to consider a video product instead to get more bang for their buck. Alternatively, if you want a sound option with full-bodied sound and fancy features for baby, and you aren't interested in watching your little one, then the SCD570 could be the one for you.
Using the buttons, you can swivel the DXR-8's camera (so you can eyeball more of the room) and zoom in close. It actually comes with two interchangeable lenses – a standard and a zoom lens – and you can also buy a separate Infant Optics Wide Angle Lens (Est. $12), all of which can be used with the zoom button. This gives you lots of flexibility when deciding where to mount your camera, Baby Bargains points out. "Depending on the configuration of your nursery, your only option may be to put the camera on a dresser across from the crib -- then the normal lens might do. But if you mount the camera on a wall above the crib, the zoom lens might be better." Later, if you use the monitor in a toddler's room or playroom, the wide-angle lens might be the best choice.
If you hope to keep tabs on your little one while snoozing there are a few different options depending on what your goals are or what information you hope to have. The traditional baby monitoring device was designed to tell parents what was going on in the room as far as a baby crying or needing assistance. Since then, monitoring products have evolved into seeing the baby and even knowing if your baby is moving. Knowing which products do what can help you determine which type meets your goals and is right for your family.
Poor quality and durability plague many baby monitors. Scores of reviewers on Amazon and other sites report that the Hello Baby HB32; Motorola MPB854Connect, MBP36XL, MBP33XL, MBP41, and MBP43; Infant Optics DXR-5; Summer Infant Dual View and Sure Sight 2.0; Levana Jena, Keera, Ayden, Astra, and Lila; Angelcare AC420; Philips Avent SCD570 and SCD630/SCD637; and VTech VM342-2 and VM343 don’t deliver on promised functionality and start to fail in some critical capacity within a year—often in much less time.
Aimee is a pediatric occupational therapist practicing in the neonatal intensive care unit and pediatric out-patient at Central Pennsylvania Rehab Services at the Heart of Lancaster Hospital. She has been working in pediatrics for 18 years and is also the owner/operator of Aimee’s Babies LLC, a child development company. Aimee has published 3 DVDs and 9 apps which have been featured on the Rachael Ray Show and iPhone Essentials Magazine. Also certified in newborn massage and instructing yoga to children with special needs, Aimee Ketchum lives in Lititz, PA with her husband and two daughters.
One of the biggest concerns with a baby monitor is going out of range and not hearing baby crying for you. Talk about a case of mom guilt! When shopping for the best long-range baby monitor, note that the range listed on the box doesn’t account for walls or doors; it’s a line-of-sight range. So, although you may not actually be able to travel 1,000 feet away from baby, you should be able to head to the basement to do laundry or be outside in the yard without worrying about missing baby’s cries.
Wireless devices and dirty electricity are almost impossible to get away from in our current technological age, but it doesn't mean we can't take steps to limit the exposure to ourselves and our children. Even though the current evidence is somewhat conflicting, and shows we need more studies and research because the potential is there for harm, parents should make informed and thoughtful decisions regarding their children's exposure to potential health risks, especially given that their bodies are developing and more susceptible to this type of radiation. We can't say for certain that monitors pose a health risk, but we also can't say for certain that they don't. Given this information, we feel it is important to test and report on the EMF levels of each monitor so parents can decide for themselves which product fits in best with their goals and concerns.
The Philips Avent SCD630 earned a 4th place rank, but it is the number 1 ranked dedicated monitor we tested. It has the longest range and highest ease of use scores for the dedicated options and the best score for sound clarity out of all the monitors we tested in this review. The Philips has lullabies, a nightlight, 2-way talk to baby, automatic screen wakeup/sleep, sound activation, 2x zoom, and a temperature sensor. While it struggles to offer true to life images and has fewer features than most of the competition, it is hard to deny that this plug and play monitor is a simple solution for video baby monitoring, and it gets the job done with little fuss and only a small learning curve. However, if you want a remote-controlled camera, you should look elsewhere, as this one is manual with a smaller field of view.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
As much as new parents want to be in the room with baby at all times, sometimes a baby monitor is necessary (like when you’re having a dinner party — or just want to watch Insecure in the next room). To help navigate the vast, confusing universe of baby monitors, we spoke to Lauren Kay, the Bump’s deputy editor, and Dave Baldwin, Fatherly’s former gear-and-tech editor and current play editor, about their recommendations, from traditional video monitors to smart-tech-enabled devices that can even track how your baby is sleeping. Add one of these to the baby registry.