While ranking among Amazon’s top-selling baby monitors, the Motorola MBP36S and MBP33S, which are listed on the same page, have more negative reviews than positive ones. Many reviewers complain about poor battery life and deficient quality and durability. BabyGearLab also gave these monitors a low rating, citing the “disappointing images and sound on a hard to use parental unit.”
Some audio/video monitors filter out "normal" sounds and motions. The receiver is supposed to turn on only when your baby makes an unusual motion or sound, such as crying or rolling over when he's waking up from a nap. This feature is designed to extend battery life, although the receiver should be docked for overnight monitoring to keep the battery charged. We haven't tested any models with this feature, so we don't know how well it works.
The Nest Cam Indoor Wi-Fi and the LeFun C2 720P Wi-Fi came in a close second to the iBaby M6S Wi-Fi for features, both scoring an 8 of 10. Because these cameras are designed more with surveillance in mind and are not solely marketed for baby, they have several features that make parents lives easier, but not anything fancy and fun for baby. They do offer 2-way communication, but no lullabies or environmental sensors. Given that many parents already have "noise makers" (aka lullabies) covered by way of another product, the lack of this feature isn't a deal breaker in our book. So while these Wi-Fi cameras lacked the gadgetry fun of humidity sensing and the other bells of the iBaby M6S Wi-Fi, they still got the job of monitoring done in a way that is easy for parents to use. The bonus of the Nest Cam Indoor Wi-Fi camera is that it can be used for multiple applications when baby gets older and no longer needs an overnight monitor. This monitor can easily shift for use as a nanny cam, security, or pet camera. We think this takes the sting (if there is some) out of its lack of baby fun features, which in the end, most parents usually stop using when the novelty wears off.
Range: Range is the main drawback of an RF model, as audio monitors can roam farther out, and a Wi-Fi connection can theoretically be checked anywhere. We wanted an adequate range in a typical home—to be able to maintain a signal up or down a flight of stairs, across the house, and out on a patio or driveway, but we didn’t expect much beyond that. We zeroed in on monitors rated to about 700 feet of range1 or greater.
So, we split our remaining finalists into three groups: WiFi Monitors for those who want to have an unlimited range or the ability to check in on their baby from anywhere, Movement Monitors for those who are comforted by hearing their baby’s vital signs, and a “standard” category for parents who want a quality monitor, but aren’t looking for that extra level of support.
As you'd expect, the talk-back functionality and audio quality on the VTech are great—easily better than the rudimentary talk-back features on our video monitor picks. With the battery lasting about 19 hours on a full charge, this monitor has the strongest battery life of any in our test. Rated to a range of 1,000 feet, it exceeds the range of our pick (700 feet) both as advertised and in practice during tests.
It should come as no surprise that we selected Nanit as the best baby monitor overall—after all, it was the winner of The Bump Best of Baby Awards this year. Nanit gives you both a clear, unobstructed view of baby thanks to the over-the-crib mount as well as sleep insight reports and nightly sleep scores via an app. You not only see how baby sleeps, but learn how to help baby sleep better.
Another Summer Infant baby monitor option, not quite as great as most others on this list, but definitely a trusted and reliable model and one of the best baby monitors available on the market this year. In our testing, one of the first things we noticed about this baby monitor was the sleek mobile-phone-size touch-screen reminiscent of the older iPhones. What's nice about this form factor is that it slips easily into your pocket like a mobile phone. Many of the others need to be clipped to your belt or waist, as they are quite a bit too thick or large for the pocket. The actual video display is modestly sized, coming in at 3.5" diagonal viewing area. This is the same size as the Infant Optics model. And it has some great features. It has remote pan (side-to-side adjust), tilt (up/down adjust), and zooming capability. Two-way audio communication so you can hear baby, and talk back to baby (maybe sing a lullaby, or whisper something to help soothe your baby). The system is also expandable to up to 4 cameras. Each additional camera is about $99, and you can place them in various locations around the home and toggle between them with the video unit. In our tests, the battery lasted about 4-5 hours when off the charger (and being used), and charged back to full capacity in only a couple hours. We didn't think the picture quality was as good as most other options on this list, nor was the sound. We also hooked it up to multiple cameras and used the "scan" feature which rotated through the various cameras once every 8 seconds. In our opinion, it took a bit too long to switch to a particular camera. It was also pretty loud when we remotely adjusted the pan/tilt of the camera. Also, it's worth noting that the pan feature doesn't seem to work when it's zoomed in. So overall, you're getting a good form factor, a reliable camera, but not the best image quality. For about $150, we think you could do better with one of our higher-rated options!
Video quality is a metric these products should perform well in, but most of them failed to offer a true to life image even in the daytime. It is disappointing that most dedicated video products aren't doing more than providing a blurry image of the baby in the room, and fail to show the baby's features or what the human eye would see in the room. The night vision is even worse than their day vision video, with some images being so blurry and hard to decipher that parents may end up going to baby's room simply because their baby has no face.
A baby monitor's job is to transmit recognizable sound and, in the case of video models, images. The challenge is to find a monitor that works with minimal interference—static, buzzing, or irritating noise—from other nearby electronic products and transmitters, including older cordless phones that might use the same frequency bands as your monitor.
The iBaby’s video and audio quality were among the best in the WiFi group, but like all WiFi monitors, quality and how well it displays real-time action depends largely on your internet quality and speed. Our testers only experienced a delay of less than a second, more noticeable than HelloBaby’s, but nowhere close to Motorola’s three-second delay.
The interface on the monitor, aka the parent unit, is basic, simple, and intuitive, while many of its competitors have awkward controls. When panning and tilting the camera, for example, the Infant Optics responds immediately and can move in very small increments. The text on the menu displays look like something off an old Motorola RAZR, but the commands are easy to interpret and less confusing than those of some competitors. A group of four buttons makes it easy to pull up the menu and make a change (to the volume, say) without losing sight of the image on the screen. Other nice minor touches, like a display that constantly notes the temperature in the baby’s room, appear on this model but not on all of its competitors. This is not a touchscreen, but frankly, if you’ve ever used an iPhone, you’ll find the touchscreens on most baby monitors to be sorely substandard.
Most connected baby monitors are effectively just home security cameras, like the Nest Cam Indoor—devices that let you watch another location with color video, night vision, and sound, so you can tell if anything is amiss. Because baby monitors are used to keep an eye on your little one rather than on your home and property, they prioritize different features than security cameras.
If your internet goes down, your baby monitor goes down. A wifi baby monitor uses your home's internet connection to communicate to servers, then to your app. So if your internet connection goes down, then you will no longer be able to stream video of your baby. That's a huge consideration to keep in mind because you never know when your internet will slow down or simply stop working for several minutes or hours, and you will be stuck without a working baby monitor. There are a few wifi baby monitors that will still communicate locally (within your home's network) when the internet goes down, such as the Lollipop or Nanit. They do this by switching from internet to local area network when an outage is detected, so you can have confidence that if you're connected to your home wifi you'll still see your baby.
Environmental sensors: Many monitors include the ability to set thresholds and upper limits for room temperature and/or humidity, and they'll alert you when these ranges are exceeded. While they can't control the temperature or the amount of moisture in the room's air, this feature can help you improve your child’s comfort, which will help them get more restful sleep.
If you’re looking to take your baby monitor to the next level, choose a WiFi monitor. Our top pick is the iBaby M6T. You can watch your baby from literally anywhere through its Apple or Android app. There are lots of customization options too, like receiving push notifications when your baby wakes up or instructions on how to improve the room’s air quality.
Shopping links are provided by eBay Commerce Network and Amazon, which makes it easy to find the right product from a variety of online retailers. Clicking any of the links will take you to the retailer's website to shop for this product. Please note that Consumer Reports collects fees from both eBay Commerce Network and Amazon for referring users. We use 100% of these fees to fund our testing programs.
Notifications and alerts work by sending a message or email to your device when motion or sound has occurred. This feature is only found in the Wi-Fi monitors, and isn't the best feature for baby because it comes after the fact (sometimes up to 30 min or more after), it does not offer details of the type of sound or motion detected, and could get annoying with useless and excessive messages being sent. In the end, we prefer sound activation over notifications and feel that alerts and notifications aren't all that useful for keeping tabs on your baby.
In terms of bang for your buck, it’s tough to beat the Babysense. For less than $100, it comes loaded with bells and whistles more commonly found on higher priced models. Not only does it boast a 2.4-inch HD LCD color screen with infrared night vision, pan/tilt, and 2x zoom, but it includes two-way talk back, a sound activated ‘Eco’ mode (the screen stays off) to save battery life, 900 foot range (with out-of-range warning), and an in-room temperature monitor that sends alerts if it gets too hot or cold. It uses 2.4 GHz FHSS wireless transmission for security and even comes with both a built-in alarm/nap timer and lullabies.
It really depends on what you feel most comfortable with. There are audio monitors that allow you to listen to any noise coming from the nursery, vital monitors that track sleep and breathing and video monitors that add sight to sound. Babylist parents overwhelmingly choose video monitors. The security of seeing what your child is up to—like if they’ve gotten tangled in their swaddle, pulled their diaper off or climbed out of the crib—can be worth the extra cost of a video monitor.