Wireless devices and dirty electricity are almost impossible to get away from in our current technological age, but it doesn't mean we can't take steps to limit the exposure to ourselves and our children. Even though the current evidence is somewhat conflicting, and shows we need more studies and research because the potential is there for harm, parents should make informed and thoughtful decisions regarding their children's exposure to potential health risks, especially given that their bodies are developing and more susceptible to this type of radiation. We can't say for certain that monitors pose a health risk, but we also can't say for certain that they don't. Given this information, we feel it is important to test and report on the EMF levels of each monitor so parents can decide for themselves which product fits in best with their goals and concerns.
We have been following news that the Amazon Echo Spot, available in December 2017, can work as a baby monitor. While we plan to test these claims firsthand, our initial interview with Amazon confirmed a few hunches, and we believe certain shortcomings will make the Echo Spot hard to recommend as a baby monitor. First, it’s not a “baby monitor” per se; the Echo Spot will project video from an existing home security camera or other Wi-Fi camera through its screen. This approach has a few disadvantages, which we outline in the What about a Wi-Fi baby monitor? section. Amazon also confirmed that the Echo Spot would broadcast the same footage you would see on that camera’s app, and that it would not work as a display for RF monitors, like our pick in this guide. The Spot can use voice commands (for example, “Alexa, show me the nursery”), and we’ll determine in testing if that capability overcomes a common flaw in other Wi-Fi monitors and security cameras, namely a sluggish response time when loading video over a standard app. You can also “drop in on the nursery” to hear audio, and potentially talk back, depending on the camera’s functions. As with the voice function, the ability to see the temperature of the baby’s room, plus pan/tilt, play music, and other functions, will be dependent on the camera the Echo Spot is attached to.
We also liked the iBaby because while it allowed us to invite other users to see through the camera — great if you want to give your babysitter access while you’re out — only the person who registered the iBaby monitor has administrator access to all of the features. The administrator can give some privileges to other users, like being able to move the camera around, but they can take them away just as quickly.
Child Safety: We care a lot about the safety and well-being of your babies, and our baby monitor reviews are no exception to that rule. Most of the safety issues with baby monitor systems revolve around the parent's due diligence: secure the wires out of reach and out of sight from your baby, make sure you put the camera out of reach (especially when you're mounting to the rail of a crib), and always keep them away from water and a running humidifier. In addition to these basic safety tips, the newer heart rate monitoring, breathing monitoring, and movement monitoring systems can add confidence to parents worried about their baby sleeping in a different room. A good example of a baby monitor with heart rate monitoring is the Owlet Smart Sock that can track heart rate and blood oxygenation levels, and stream that information to an app on your smart phone. Of course, don't be too confident because these devices are not hospital- or laboratory-grade monitoring systems, so keep that in mind.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Most people don't have unlimited data plans for their smart phone, and are surprised to see very high data usage after just a few hours of streaming their wifi baby monitor. With HD video, you can go through a couple gigabytes of data in just a few hours, so keep that in mind. If your phone is connected to wifi that won't matter, but if you're using 3G or 4G LTE cellular service, you will definitely have slow video and tons of data usage.
To test connectivity, we put the handheld unit and the camera in neighboring rooms with 30 feet between them. We looked for lag, choppiness, and changes in the video or sound quality. While we rated it separately, we also did tests to estimate each baby cam’s maximum indoor range. Each camera we tested has a range of 100 feet or more, which is enough for an average-size home.
The new voluntary ASTM International F2951 standard has been developed to address incidents associated with strangulations that can result from infant entanglement in the cords of baby monitors. This standard for baby monitors includes requirements for audio, video, and motion sensor monitors. It provides requirements for labeling, instructional material and packaging and is intended to minimize injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of baby monitors.
Some good things about this model set it apart from competitors. The iBaby connects when you simply plug in your phone via a USB port on the camera body and grant permission for the monitor to access your wireless settings. The competitors make you enter a router’s network key—certainly doable, but not as easy as the iBaby. With 360-degree pan and 110-degree tilt motion, the iBaby can technically see more of the room than our Infant Optics pick—although its bulbous shape is a little harder to arrange than the pick’s simple wall-mount or stand-up base. The M6S model’s video quality and night vision were on a par with that of our former runner-up, the Samsung SEW3043 BrightView HD (but those results will vary with the quality of your Internet connection and your device’s display). The audio from the camera can play in the background on your phone, so you don’t have to keep the app open at all times.
A big screen, a camera that zooms and a built-in nightlight make the In View monitor a great pick when you’re on a budget. The monitor also offers all the standard features: low-battery and out-of-range indicators, sound-activated lights and rechargeable batteries for the handheld monitor. Use the camera as a tabletop or mounted on the wall. And if you plan on having a big family, the monitor works with up to four cameras.