A baby monitor's job is to transmit recognizable sound and, in the case of video models, images. The challenge is to find a monitor that works with minimal interference—static, buzzing, or irritating noise—from other nearby electronic products and transmitters, including older cordless phones that might use the same frequency bands as your monitor.
In our tests, Levana Ayden did well in the categories where Levana Keera underperformed, particularly with regards to user-friendliness. This was most noticeable in the simple controls, which are easy to learn. Levana Ayden also has a few useful extras such as a built-in nightlight and three lullabies to help sooth your baby as they sleep. This unit costs around $90, which is quite competitive with other video baby monitors. Unfortunately, the unit lacks the ability to remotely reposition the camera and has lower than average video quality, which can make details hard to see. The audio had mild interference, but this didn't affect the overall quality much. The one-year warranty is typical of video baby monitors.

Movement products are designed to sense the movement associated with a baby breathing. These products attempt to discern when your little one has not moved within a prescribed period that could indicate that they have potentially stopped breathing. While this may seem like a no-brainer option for parents worried about Sudden Infant Death Syndrome (SIDS), they are not foolproof, have not been approved by the FDA as a medical device, and are known to have false alarms where the baby is fine but then suddenly awakened by a loud alarm. While it is an interesting kind of product, we caution parents that this type of device is not a substitute for safe sleeping practices and doesn't prevent SIDS. However, if you are willing to accept false alarms, it can provide another layer of monitoring to help some parents sleep better at night. Movement sensing products are only useful until babies start to roll over, at which point they become unreliable.

Credit: NetgearCuteness aside, the Arlo Baby is compact enough to fit into even the most crowded nursery; a wall mount is included if you prefer that option. While you plug the camera in to power it, you can also detach the camera and move it into any room where an impromptu nap occurs, though we only saw three hours of battery life when we tried this out.


Both Kay and Baldwin chose the Infant Optics DXR-8 as their top choice in video baby monitors (it also has nearly 24,000 4.4-star reviews on Amazon). The DXR-8 uses secure 2.4 GHz FHSS wireless transmission (as opposed to Wi-Fi) to send crystal clear color video and audio to the receiver, has a solid battery life, allows for remote pan, zoom, and tilt capabilities, and comes with an interchangeable zoom lens (with a wide-angle lens sold separately). Other features include a two-way intercom, remote temperature display, and the option to set the monitor to audio-only.
We got our hands on this KX-HN3001W Panasonic baby monitor in late 2018 for testing, and we were pleasantly surprised with its features, reliability, image quality, and competitive cost. Panasonic has been in the video baby monitor market for many years, and they have consistently improved the quality and reliability of their products along the way. Remember how reliable those old Panasonic DECT cordless phones were when you were a kid? You could drop them, discharge them, lose them in the couch pillows, walk them to the other side of the house, and slam them down for a dramatic ending to a phone call. These devices reminded us of those, mostly out of nostalgia, but also because the portable receiver seemed very well made and reliable. Out of the box, it comes with the color monitor receiver along with a battery and wall plug, the camera and a wall plug, and a wall-mount for the camera. We didn't realize it comes with a wall-mount and were excited to give that a shot. During setup, we mounted the camera to the wall of our test nursery and aimed it at the crib. Once it's mounted to the wall, you can still tilt and pivot it around to get a good pointing direction. Powering it on, it connected quickly to the camera unit; note that you can add two extra camera units as well, and view/control them from the same receiver (those extra cameras aren't available for sale yet). We first tested it during the daytime, and found the color screen to be clear and vivid, the connection to be reliable and relatively long-range (it worked in our back yard), and the battery life to be about 3 hours with the screen on (and unplugged obviously). It goes for much longer in stand-by mode with the screen turned off. During the nighttime, the monochrome night vision worked reasonably well. We found that it worked better if the camera unit was placed relatively close to the crib so you don't have to zoom in and lose image quality. The night vision wasn't on par with the higher-rated baby monitors on this list, but it was pretty decent. After getting the basics down, we tried out some of the cool features. It has a 2-way talk feature that actually sounded pretty good, little melodies and lullabies (or white noise!) you could play to your baby, and the life-changing remote pan/zoom/tilt. That last feature is really a necessity for modern baby cameras so you don't have to tip-toe into your baby's room and try to change the camera angle because it got bumped during the day or your baby decided to sleep on the other side of the crib. The other awesome thing about this baby monitor is that it has room temperature alerts, which allows you to set a safe range (like 68 to 72 degrees) and then it will alert you if the nursery room's temperature ever goes out of that range. There is also a little current temperature indicator on the screen, which is a nice touch. It also has a great stand-by mode that will keep the monitor off until it senses movement or hears your baby (you can set which of these you want to trigger an alert), at which point the device will alert you and turn on. This is great for a few reasons, but mostly because it helps keep battery life up to about 10 hours when kept on stand-by mode. A little extra feature is that you can set the device to automatically turn on a melody or white noise when your baby moves or makes noise - nice touch. A couple more things we noticed. First, the portable device uses micro-USB for charging, which means that you can use most phone or device charger with the same connector type (but not an iPhone charger!). That was convenient for when you're in another room and just want to quickly plug it in, just like you would with your phone. Second, on the bottom of the camera there is the standard tripod screw hole, so you can set it up on any tripod type of device (like those little ones that attach to walls, grip onto crib rails, etc). So there's some really great stuff going on here, and we are very happy to have tested it for inclusion on this list! But there are also some downfalls. First, it is built to control more than one camera, but as of late 2018 we haven't seen the additional cameras available on the market. Second, the night vision isn't up to par with the Infant Optics or other top-rated baby cameras; in fact that was the biggest challenge with this baby monitor, and we are patiently waiting for Panasonic to release a new version with better quality night vision. Third, the display is clearly not high definition, but to be fair the screen isn't really large enough to notice any pixelation. Other that that, you're getting a fantastic baby monitor for only about $120, and that's a lot of bang for the buck! Interested? You can check out the Panasonic Video Baby Monitor here.

The 3.5" diagonal color screen on the MBP36S shows real-time video and sound in your baby’s room, and you can remotely pan, tilt, and zoom the video image as needed. The product offers a 300 degree viewing range so your child will never be out of sight. Infrared night vision allows you keep an eye on things in low light levels without disturbing little sleepers.
One minor but potentially annoying flaw: The “on” lights on the parent unit are a touch bright, and you may be more sensitive to them since you’re likely to have the unit within view as you sleep. They appear as greenish yellow light from the face of the unit, and a charging light, which is blue when it’s fully charged. Depending on how sensitive you are to light, you may want to lay the display face down on a nightstand or cover the status lights with tape.
The Nanit couldn’t be more perfect for analytical types. The camera—when placed just so—uses computer vision to watch your baby’s every move, and then tell you what it means. You get a notice on your phone, which acts like a handheld monitor, when your child is awake, acting fussy or has fallen asleep. The Nanit also assigns a sleep score to each night based on how many hours your child was actually crashed out. Other stats include how many times you went into your child’s room and how long it took for your little one to fall asleep. Because the Nanit streams live video and audio to your phone, you can also check in on your kiddo when you’re away from home. It also has a nightlight and temperature and humidity sensors.
×