There are a few things you can demand from a decent HD video baby monitor, like a crystal clear image and good night vision capabilities. And there are things you can expect of a good Wi-Fi-enabled monitor, like easy remote access from a smart device with real-time streaming audio and video. Then there are things you might hope for from a baby monitor, like two-way talk and solid battery life.
Video baby monitors are simple, inexpensive tools for watching your child, and HD video is not a necessity for this task. While some baby monitors have excellent video, even those with lower quality video are suitable for watching your infant. Screen resolution does not necessarily mean good image quality, so we didn't use it as a point of comparison, relying only on video performance as observed in our tests.

However, the Baby Delight’s biggest flaw is one of technicality: Its button sensor is just large enough to avoid being labeled as a choking hazard, but it doesn’t leave a lot of room for error. In fact, the button does become a choking risk after your child is 3 years old, and the new parents we spoke to felt uneasy about using it after 12 months just to be safe. Still, if you’re only interested in monitoring movements for the first few months, the Baby Delight is a more user-friendly alternative to the Angelcare.

It should come as no surprise that we selected Nanit as the best baby monitor overall—after all, it was the winner of The Bump Best of Baby Awards this year. Nanit gives you both a clear, unobstructed view of baby thanks to the over-the-crib mount as well as sleep insight reports and nightly sleep scores via an app. You not only see how baby sleeps, but learn how to help baby sleep better.


One minor but potentially annoying flaw: The “on” lights on the parent unit are a touch bright, and you may be more sensitive to them since you’re likely to have the unit within view as you sleep. They appear as greenish yellow light from the face of the unit, and a charging light, which is blue when it’s fully charged. Depending on how sensitive you are to light, you may want to lay the display face down on a nightstand or cover the status lights with tape.

iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here. 

Long Range: Monitors that don’t connect to WiFi have a limited range, usually around 600 to 1,000 feet. While this is large enough for all but the biggest houses, we asked our testers to find out how far they could wander away — and how many walls they could put between them and the baby unit — before they went out of range, as well as to report back on what happened when they did. Sometimes there was an alarm or a notification, but other times the screen simply froze.


The video on its handheld unit is sharp and consistent, and even with 30 feet between the camera and the handheld unit, there wasn’t lag or interruption in the video. In addition, you can use the handheld unit to remotely point the camera at different parts of the room. Although you can't record video or take pictures with the DXR-8, these aren’t important features for a baby monitor. Setup is incredibly easy. After charging the handheld unit overnight, we plugged in the camera and it instantly connected. There was a slight lag in the video when the camera and handheld unit were 50 feet apart, which is why it only scored 90 percent in our connection test, but that’s still better than other baby monitors we reviewed. In our battery life test, the monitor lasted 10 hours – only one other model has a battery that lasts this long. This video baby monitor doesn't have Wi-Fi, but that's not a problem. Our top Wi-Fi monitor, the Philips Avent, is more expensive and didn't perform as well as the DXR-8 in our tests. This baby camera has swappable lenses for telephoto and wide-angle views. It also has invisible infrared LEDs that let you see your baby in complete darkness without waking them. The DXR-8 doesn't have a nightlight or lullabies to comfort your baby, but those exclusions don't make this baby monitor any less impressive. The warranty on the DXR-8 only lasts a year, compared to the two-year warranty on the Philips Avent.
If you sleep in the same room as your baby or live in a small enough space that you can always hear or see what your baby is up to, you probably don’t need a monitor. Otherwise, most parents enjoy the convenience a baby monitor provides—instead of needing to stay close to the nursery or constantly checking on your child, you’re free to rest, catch up on Netflix or get things done around the house during naptime. Monitors can also double as a nanny cam to keep an eye on your child and their caretaker.
×