So, we split our remaining finalists into three groups: WiFi Monitors for those who want to have an unlimited range or the ability to check in on their baby from anywhere, Movement Monitors for those who are comforted by hearing their baby’s vital signs, and a “standard” category for parents who want a quality monitor, but aren’t looking for that extra level of support.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
It may surprise you to hear that simply being able to last through the night, unplugged, with the display off, qualifies as exceptional battery life for a baby monitor. The Infant Optics was one of the only monitors in our testing that could easily do that, and then last a while longer the next day before needing a charge. (The manufacturer claims it lasts 10 hours with the display off—we got that amount of time off a full charge, even when checking the display intermittently.) This model also charges via a USB connection, which actually sets it apart from a variety of competitors, some of which use ineffective and inconvenient proprietary DC chargers or even disposable batteries.
Security: Whether you’re skeptical of people hacking baby monitors or deeply concerned about it (and there are stories!), the bottom line is that some monitors are at more risk than others. A Wired story from 2015 refers to security firm Rapid7’s findings that Wi-Fi–enabled monitors were particularly vulnerable. We figured people would prefer the not-hackable type, and we talked to a security expert about how to protect your privacy.
Once you've settled on a type and have considered your range, you can look at the potential choice and which features they have. The more budget-friendly choices usually lack bells and whistles but are still functional. If you want more features like nightlights, lullabies, and talk to the baby, then you may pay more and the unit could be more difficult to use. The one feature we think is important is sound activation to help keep your device quiet when your baby is quiet, thereby increasing your chances of a full night's sleep.
The Philips Avent SCD630 is the easiest to use dedicated option with a score of 8 of 10. This monitor is a plug and play that pairs the camera and parent unit by itself. The parent unit has very few buttons, with the most frequently used buttons are on the face of the unit. The menu options are relatively intuitive with not much chance of taking a wrong turn or getting buried in a file menu system you can't get out of. The menu could be easier to use, but we think most parents will stick to the buttons on the front of the unit after a few weeks of regular use. The Levana Lila has fewer features and is even easier to use, thanks to a lack of convoluted menu options.
Some good things about this model set it apart from competitors. The iBaby connects when you simply plug in your phone via a USB port on the camera body and grant permission for the monitor to access your wireless settings. The competitors make you enter a router’s network key—certainly doable, but not as easy as the iBaby. With 360-degree pan and 110-degree tilt motion, the iBaby can technically see more of the room than our Infant Optics pick—although its bulbous shape is a little harder to arrange than the pick’s simple wall-mount or stand-up base. The M6S model’s video quality and night vision were on a par with that of our former runner-up, the Samsung SEW3043 BrightView HD (but those results will vary with the quality of your Internet connection and your device’s display). The audio from the camera can play in the background on your phone, so you don’t have to keep the app open at all times.
We have been following news that the Amazon Echo Spot, available in December 2017, can work as a baby monitor. While we plan to test these claims firsthand, our initial interview with Amazon confirmed a few hunches, and we believe certain shortcomings will make the Echo Spot hard to recommend as a baby monitor. First, it’s not a “baby monitor” per se; the Echo Spot will project video from an existing home security camera or other Wi-Fi camera through its screen. This approach has a few disadvantages, which we outline in the What about a Wi-Fi baby monitor? section. Amazon also confirmed that the Echo Spot would broadcast the same footage you would see on that camera’s app, and that it would not work as a display for RF monitors, like our pick in this guide. The Spot can use voice commands (for example, “Alexa, show me the nursery”), and we’ll determine in testing if that capability overcomes a common flaw in other Wi-Fi monitors and security cameras, namely a sluggish response time when loading video over a standard app. You can also “drop in on the nursery” to hear audio, and potentially talk back, depending on the camera’s functions. As with the voice function, the ability to see the temperature of the baby’s room, plus pan/tilt, play music, and other functions, will be dependent on the camera the Echo Spot is attached to.
If we picked a winner based on features alone, this would be much higher up on the best baby monitor list! The folks at Project Nursery really pulled out all the stops with this feature-packed video monitor. Here are some of the stand-out features: remote camera pan and tilt, two-way audio intercom, infrared night vision, secure (encrypted 2.4GHz) wireless connection, motion alerts, lullaby music, convenient unintrusive sleep modes, low or high temperature warning, pairing for up to 4 cameras, accurate low battery warning system, and great battery life. But even with all of that, there's something really awesome and unique about this baby monitor: in addition to the nice 4.3" screen (there's also a 5" version for a much higher price), it also comes with a 1.5" mini video monitor that you can take with you! Put it on your waist, on the kitchen counter, on your wrist (using the included strap!), or on a table or desk while you do work. We found this mini video monitor aspect super versatile, with high-quality resolution and color video, and probably worth the added cost. Speaking of cost, having all these awesome features and the nifty extra monitor comes at a pretty reasonable cost (about $120) unless you upgrade to the 5" screen. Is it worth it? Well, in our testing the mini monitor had a battery life of about 7 hours when fully charged, which we were really impressed with. The larger "parent" monitor is usually plugged in (like on a bedside table), but on battery mode we got it to run overnight without charging for about 12 hours. That's great battery life for such a large-screen video baby monitor! So some high-quality lithium-ion batteries went into making these monitors, and it shows. The color screen and audio quality were also very high on both units, and it's awesome to have multiple parent units for different situations. Out of the box, setup was pretty simple, and all parts appear to be high-quality and well made. So with all those positives, why isn't this #1 on our list!? First, it has the remote camera pan/tilt, but we found that when the camera is tilted down too much the infrared night vision feature doesn't work so well (there's a glare/reflection). We needed to re-position it in our nursery so that it wasn't pointing down at such an extreme angle; we suspect this won't be an issue in most cases. Second, we tried to get both the large "parent" monitor to work at the same time as the mini monitor, but couldn't get them to both show video simultaneously. We understand that may not be a common use case, but might be nice for parents to be in different locations with both being able to monitor the baby's activity. Again, not a huge issue. Overall, this is an excellent baby monitor system with only some minor drawbacks. Worth the cost? We'll leave that up to you: if you want these awesome features, it's probably worth every penny! Update: So it's been about 6 months now, and we've noticed two things worth pointing out. One is that the cameras disconnect intermittently and have a real hard time reconnecting; this has happened in the middle of the night a few times, which was concerning. Second is that the battery life has declined quite a bit since when it was new, now only lasting a few hours off the charger.
However, the Baby Delight’s biggest flaw is one of technicality: Its button sensor is just large enough to avoid being labeled as a choking hazard, but it doesn’t leave a lot of room for error. In fact, the button does become a choking risk after your child is 3 years old, and the new parents we spoke to felt uneasy about using it after 12 months just to be safe. Still, if you’re only interested in monitoring movements for the first few months, the Baby Delight is a more user-friendly alternative to the Angelcare.
Baby monitors shouldn't be used as a substitute for adult supervision. They should be considered as an extra set of ears—and, in some cases, eyes—that help parents and caregivers keep tabs on sleeping babies. Using one can alert you to a situation before it becomes serious, for example, if your baby is coughing, crying, or making some other sign of distress. Experts warn that you can't rely on a monitor to prevent Sudden Infant Death Syndrome (SIDS).
The price of the Infant Optics, at about $150, is on the higher end for baby monitors. As much as we wanted to recommend a more affordable option, we found their shortcomings to be major enough—terrible video quality and poor connections were common—that we couldn’t recommend one. The Infant Optics offers a better value even though it’s among the more expensive options out there. Many people use these daily for years, which helps justify the investment, and the reports of reliable customer service from other customers are reassuring. If you have to spend less, go audio-only.
It’s hard not to like the crystal-clear picture you get on this monitor’s 7-inch screen (the biggest screen on this list!). Its standalone camera can be moved from room to room and will remotely pan, tilt and zoom. Given the cost, this monitor is best if you want full control of the nursery environment. It syncs with the Smart Nursery humidifier and the Dream Machine sound and light machine. Once connected, you can turn on lullabies, project lights onto the ceiling and increase the room’s humidity all from your monitor.