Motion and audio sensors: In the old days, parents were forced to endure a consistent ambient hiss from their audio monitors while they listened for their child’s stirrings or cries. Mercifully, many modern baby monitors will stay in “quiet mode” until they detect motion and/or sound, which will trigger an alert, such as activating the handheld video display or pushing a notification to your smartphone.
Wireless encryption: This ensures that no one else can tap into your monitor’s “feed” and see what’s going on in your house. WiFi-enabled monitors are great for portability and range, but may be more susceptible to hacking. If you go this route, be sure to secure your home wireless network and keep the monitor’s firmware updated. Otherwise look for digital monitors with a 2.4 GHz FHSS wireless transmission.
The Snuza Hero SE is a wearable device that clips to baby's diaper or bottoms. It has a unique vibration alert that attempts to rouse little ones into moving enough to stop the impending alarm that will sound audibly if the baby doesn't move. This vibration feature means that false alarms may be less likely to result in a crying baby, though they could cause lack of deep sleep if they happen continually. The Snuza is a nice wearable choice that is easy to use, portable, and didn't have many false alarms during our testing. While it is not a replacement for safer sleep practices, it could provide some parents with increased peace of mind for a better night's sleep.
Electromagnetic fields (EMF), or dirty electricity, is something we think needs to be discussed when talking about wireless baby monitors. Given that all wireless devices give off some level of EMF, we feel it would be negligent not to discuss the potential for possible health risks associated with the kind of radiation emitted by wireless products. While the jury is still out, and studies being done are not conclusive yet, there is enough evidence that EMF might potentially cause health problems that we feel it is better to be cautious when it comes to children's exposure than to ignore the possibilities.
As with any internet-connected device that watches or listens to your home, it's not out of the ordinary to be somewhat wary of a smart baby monitor. All Internet of Things (IoT) devices are potential soft spots for hackers to monitor you. Anything you network can possibly be compromised, and while you shouldn't be afraid of an epidemic of camera breaches, you should always weigh the convenience of these devices against the risk of someone getting control of the feed.
Wireless systems use radio frequencies that are designated by governments for unlicensed use. For example, in North America frequencies near 49 MHz, 902 MHz or 2.4 GHz are available. While these frequencies are not assigned to powerful television or radio broadcasting transmitters, interference from other wireless devices such as cordless telephones, wireless toys, computer wireless networks, radar, Smart Power Meters and microwave ovens is possible.
Not everyone needs a baby monitor. If you live in a smaller house or apartment, keep your infant in close proximity, or just generally don’t feel the need to monitor your baby as they’re sleeping (the infant cry is hard to miss!), you may find that a monitor is unnecessary. Other people may only want a monitor for occasional use, like when you’re out in your yard while your baby is napping and want to know when they’ve woken up.
Wireless devices and dirty electricity are almost impossible to get away from in our current technological age, but it doesn't mean we can't take steps to limit the exposure to ourselves and our children. Even though the current evidence is somewhat conflicting, and shows we need more studies and research because the potential is there for harm, parents should make informed and thoughtful decisions regarding their children's exposure to potential health risks, especially given that their bodies are developing and more susceptible to this type of radiation. We can't say for certain that monitors pose a health risk, but we also can't say for certain that they don't. Given this information, we feel it is important to test and report on the EMF levels of each monitor so parents can decide for themselves which product fits in best with their goals and concerns.
Parents are spoiled for choice nowadays, thanks to the rise of the connected home and new technologies like live-streaming video and high-resolution cameras. No matter which type of baby monitor you buy — whether it be an old-school audio-only monitor or a fancy Wi-Fi video monitor — it will have two parts: a monitor in the baby's room and a receiver that you carry around with you to hear and/or view your baby.
The longest battery life for the dedicated products in our review is the Levana Lila, which ran for 12.75 hours in full use mode. The manufacturer claims this unit will work up to 72 hours in power saving mode, but we only tested the monitors in full use. The Infant Optics DXR-8 came in second place with a shorter run time of closer to 11.5 hours. The Motorola MBP36S earned the lowest score for battery life with a runtime just under 7 hours. While not necessarily a deal breaker, there are plenty of other reasons to dislike the Motorola MBP36S, and the battery life is just a small part of a disappointing overall picture (no pun intended).
The Philips Avent SCD630 earned a 4th place rank, but it is the number 1 ranked dedicated monitor we tested. It has the longest range and highest ease of use scores for the dedicated options and the best score for sound clarity out of all the monitors we tested in this review. The Philips has lullabies, a nightlight, 2-way talk to baby, automatic screen wakeup/sleep, sound activation, 2x zoom, and a temperature sensor. While it struggles to offer true to life images and has fewer features than most of the competition, it is hard to deny that this plug and play monitor is a simple solution for video baby monitoring, and it gets the job done with little fuss and only a small learning curve. However, if you want a remote-controlled camera, you should look elsewhere, as this one is manual with a smaller field of view.
Rechargeable batteries: Since the camera will most likely stay trained on your bundle of joy, it can remain plugged into AC power. But parent unit displays are designed to be always on and carried with you as you move from room to room. That can drain batteries quickly. Look for a parent unit that runs on rechargeable batteries, so you’re not constantly swapping them out.
Video quality is a metric these products should perform well in, but most of them failed to offer a true to life image even in the daytime. It is disappointing that most dedicated video products aren't doing more than providing a blurry image of the baby in the room, and fail to show the baby's features or what the human eye would see in the room. The night vision is even worse than their day vision video, with some images being so blurry and hard to decipher that parents may end up going to baby's room simply because their baby has no face.
There are two basic types: audio and video/audio. Some are analog, others are digital. All monitors operate within a selected radio frequency band to send sound from a baby's room to a receiver in another room. Each monitor consists of a transmitter (the child/nursery unit) and one or more receivers. Prices range from about $25 to $150 for audio monitors and about $80 to $300 for audio/video monitors.
Once you've settled on a type and have considered your range, you can look at the potential choice and which features they have. The more budget-friendly choices usually lack bells and whistles but are still functional. If you want more features like nightlights, lullabies, and talk to the baby, then you may pay more and the unit could be more difficult to use. The one feature we think is important is sound activation to help keep your device quiet when your baby is quiet, thereby increasing your chances of a full night's sleep.
It’s hard not to like the crystal-clear picture you get on this monitor’s 7-inch screen (the biggest screen on this list!). Its standalone camera can be moved from room to room and will remotely pan, tilt and zoom. Given the cost, this monitor is best if you want full control of the nursery environment. It syncs with the Smart Nursery humidifier and the Dream Machine sound and light machine. Once connected, you can turn on lullabies, project lights onto the ceiling and increase the room’s humidity all from your monitor.