The Philips Avent DECT SCD570/10 is a sleek looking, quality sound device that has a more extended range than much of the sound competition. It has a battery life of over 30 hours and excellent sound clarity for true-to-life sounds. The nursery unit has a nightlight, lullabies, mic sensitivity function, and a 2way talk to baby feature providing the most popular features for today's demanding parents.
Start by deciding whether you want an audio-only monitor or one that lets you see as well as hear your baby. Some parents are reassured by hearing and seeing every whimper and movement. Others find such close surveillance to be nerve-racking. Having a monitor should make life easier, not create a constant source of worry. You might find that you don't really need a monitor at all, especially if your home is small.
iBaby makes a really confusing range of baby monitors. From cheapest to most expensive this includes the iBaby Monitors M2, M2S, and M2 Plus, iBaby M6, M6T, and M6S, and the new iBaby M7. The M2 series is usually under $100 and is pretty poorly reviewed overall. The M6 series is usually about $125 and is decently reviewed. Finally, the new M7 is brand new and only differs from the M6S in that it has a smell detector and night sky projector that can shine the moon and stars onto the ceiling (our review of the M7 is above). There's truly a lot to love about the iBaby M6S. It looks great, is pretty easy to setup, and has a ton of appealing features. Some highlights are that it uses 1080p high definition video, it senses room temperature and humidity levels, has an air quality sensor (measures the presence of volatile organic compounds or VOCs in the nursery), is dual band wifi compatible (2.4 and 5GHz), and a two-way intercom. It also can record HD videos, remotely pan (rotate) and tilt up/down, and you can setup alerts for motion, sound, and VOCs (from 1 to 4 with 4 being best). So it basically has everything that might be on your list of baby monitor essential features, and we were really excited to set it up. Out of the box, we found it easy to download the app to our smart phone (Android or Apple), connect to the monitor and connect it to wifi, and get things up and running. A couple notes here - first, your wifi password needs to be shorter than 32 characters or the app won't accept it, and second, there is no way to manually set an IP address for the camera. When we used it on our home wifi network, we found that the images were clear and decently fast (low lag), and the night vision was high-quality and not too grainy. We especially liked the pan and tilt features from the app, which allows you to move the camera's view angle around without going into the nursery (and it uses a cool screen-swipe gesture to do it). Once we left our home's wifi connection and tried to connect to the camera from a 4G LTE or a different wifi network, that's when we started to run into problems. It was choppy and laggy, which to be honest is what we expected when attempting to stream 1080p HD video outside of your home network. So we changed the resolution settings on the app (Settings - Display Settings - Resolution) to downgrade it to a lower quality stream; that seemed to help a bit. We also had difficulty connecting to the camera at times, whether we were at home or elsewhere, which was one of the more frustrating things about the iBaby Monitor M6S. The temperature and humidity sensors seemed to work pretty well, and we confirmed their accuracy with a separate thermometer and hygrometer (they were pretty decent in accuracy). For the two-way intercom, the speaker in the camera seemed pretty poor quality so it was hard to hear my voice when attempting to speak to (or sing to) our baby. Finally, we had some issues with alerts coming through to the app as intended. We setup the temperature, humidity, and VOC alerts, and had really intermittent alerts when we tested them out. The temperature and humidity sensors seemed to be reading just fine, they just weren't reliably triggering an alert when they deviated from a range. For example, we set a temperature alert for 80 degrees then blew a hair dryer at the camera; it warmed way up, but the alert wasn't triggered, so that was frustrating. We didn't test the VOC sensor, though one could imagine you could open up a can of paint next to the camera and see if it sends an alert. So overall, we have a decent wifi baby monitor that has some excellent features but also leaves a lot to be desired in the reliability department. Interested? You can check out the iBaby M6S Baby Monitor here.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of CNET.com, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro, Tested.com, Geek.com, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert... See Full Bio
Today’s best baby monitors are not your mama’s baby monitors! High-definition video monitoring is becoming the norm, and many baby monitors are now app-enabled or have wi-fi capabilities. Even basic audio monitors have stepped up their game, with many implementing DECT (Digital Enhanced Cordless Telecommunications) technology to eliminate the interference and the lack of security that comes from monitors using the 2.4 GHz frequency band. If you’ve ever heard your neighbors chatting through your baby monitor, you’ll appreciate this change! DECT also prevents super-creepy baby monitor hackers from spying on baby—or you!
It may surprise you to hear that simply being able to last through the night, unplugged, with the display off, qualifies as exceptional battery life for a baby monitor. The Infant Optics was one of the only monitors in our testing that could easily do that, and then last a while longer the next day. That alone puts it head-and-shoulders above many other monitors we tested.
The Arlo Baby camera, which comes dressed as an adorable green bunny, connects to your wireless internet and connects to your phone via the associated app. It streams 1080-pixel video footage, even at night, and has an 8x zoom to let you see exactly what’s going on in the nursery. There’s a two-way talk feature, night light and smart music player, as well as an air sensor and baby crying alert, letting you keep a watchful eye on your little one.
One of the primary uses of baby monitors is to allow attendants to hear when an infant wakes, while out of immediate hearing distance of the infant. Although commonly used, there is no evidence that these monitors prevent SIDS, and many doctors believe they provide a false sense of security. Infants and young children can often be heard over a baby monitor in crib talk, in which they talk to themselves. This is a normal part of practising their language skills.
The LeFun is an inexpensive Wi-Fi camera that makes internet watching affordable for almost every family. This useful camera works with your personal device and is the only option here that features true pan and scan features to move the camera around the room remotely. The image quality is also impressive given the lower price and simple design. This camera is a good choice if your house is bigger or you'll be spanning more than 3-5 walls between rooms where range could become an issue.